Jump to content
SAU Community

Recommended Posts

yeah true. I still don't believe it's anything like 10% though. Someone please drive through a 110 camera at 122 and tell me what happens :P my guess is fine.

I don't know exacly how they are set at present but I believe they are not at a set % and it depends where they are located as to what speed above the limit they will nab you .

I know of a camera that will trigger at 66 on a 60 zone as far as 110 limit goes, I believe they will give you about 8-9 kmh above that in NSW.

I wouldn't drive past a camera at anything above the speed limit , don't forget its about 1.5 mts that they check your speed . On school zone cameras I drive past well bellow the signposted limit and close to 40 kmh outside school hours because some of them are known to have issued tickets outside school hours if you are over the 40 k limit . I know you can go to court and you will win everytime but it costs time and money .

Point to point speed cameras are different and I have heard tickets issued for 1 k over the limit .

The speed at which the camera is triggered is relative to the speed zone. You do have a bit more head room with the higher speed limits tho. As for the exact speed at which they go off at....thats pretty classified information. My best mate used to install and service them and even he won't tell me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...