Jump to content
SAU Community

Recommended Posts

Ok guys, I know this has been asked one billion times before but I'm gonna ask again cos this time for me it's a bit different...

I'm looking at a car in Perth, it HAS been complied however is not registered nor has it ever been in Australia. If I buy it and get it down here, will I only need to go for a vehicle inspection down at a police station for them to allow me to register it (obviously I'll need to get temporary rego to drive it down there) or do I need to pass it over the pits again? I rang Regency just then and they said that as long as it has it's compliance plates it will only need a police check but that seems too easy to me.

Also, if I do go down this path, I need to get my hands on a standard GTR bonnet (in white preferably) as it has a carbon fiber one on it that I don't think the police would take too kindly to. Anyone able to help out there?

Link to comment
https://www.sau.com.au/forums/topic/202469-help-me/
Share on other sites

Ah so it won't be a full over the pits inspection then? Like I said, the only MAJOR stand out thing is the bonnet and possibly the ride height, however the aftermarket suspension IS height adjustable. AFAIK, 18' rims are allowable on a GTR correct?

Link to comment
https://www.sau.com.au/forums/topic/202469-help-me/#findComment-3594476
Share on other sites

yeah 18's are allowed.

If the car has compliance they should only check the

Engine NO

Vin NO

Build date

window tinting (they will make you peel it off if its to dark)

exhaust (rarely)

it a quick and easy check just to make sure the car or the engine isn't stolen

Link to comment
https://www.sau.com.au/forums/topic/202469-help-me/#findComment-3594490
Share on other sites

Yeah what whiplash said is correct.

Had mine in the sturt shed about a week ago for the same deal.

As long as there's no stand outs like dark tint, wheels sticking out of guards or guards sitting on tyres, you should be fine.....if it's loud don't rev it, just idle it into the shed.

Do what I did.....wait for 40 degree day and show up 15 minutes before knock off......Sturt shed is open till 3.00pm Wed & Thur with no appointment needed.

Link to comment
https://www.sau.com.au/forums/topic/202469-help-me/#findComment-3594975
Share on other sites

  heslo said:
Wow, this is good news. So after I take it to the police, I assume they give me some paperwork that I take to motor reg that allows me to register the vehicle here in SA? Correct?

do you have any pics of the car your looking at??

Link to comment
https://www.sau.com.au/forums/topic/202469-help-me/#findComment-3595560
Share on other sites

The pillar guage and boost controller(??) will raise their interest straight away, you'll want to be rid of them for the inspection. I would think see if you can get a stock seat and bonnet. With those things changed over HOPEFULLY they wont send you for full inspection.

Link to comment
https://www.sau.com.au/forums/topic/202469-help-me/#findComment-3595800
Share on other sites

Obviously I'd change over the bonnet, EBC and pillar gauge to standard, hence why I asked here if anyone had a standard bonnet, suspension is also height adjustable so that isn't an issue. Also not a fan of the front bar either but that's easy enough to source another. Just everything else about the car I love and I really would like to get my hands on it. Just wish I could get a straight answer from Regency about it. They said it SHOULD be ok just a visual ID, but can't guarantee it. Idiots

Link to comment
https://www.sau.com.au/forums/topic/202469-help-me/#findComment-3596461
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...