Jump to content
SAU Community

Recommended Posts

Hi All

just a quickie..........................how many people have removed an atmospheric blow off valve and replaced it with factory item and seen an improvement on idling and stalling problems on a r33 gtst.

as this eems to be a recurring topic, i just wonder how many of us have gone back to factory valve.

i dont really want to remove my ssqv and refit factory unit, but if it solves the problems i may have to consider it :D

Link to comment
https://www.sau.com.au/forums/topic/202521-atmospheric-blow-off-valve-issues/
Share on other sites

ive switched constantly between my stockie and ssq for my needs=stealth.

i have NEVER experienced idle or stall issues. with the ssq it runs rich between vents, so fuel goes thru the exhaust which my mates say gets me a flame...

other than that ive had no probs with vta bov's

Hi Simon

ATMO BOV's and their issues on a AFM equipped car are long discussed on this forum.

There are even links in the FI Guide.

Please search and read the links in the guide and other threads.

Please take the time to read them, it will give you a clean understanding. No need for another BOV thread when we have 100's already

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...