Jump to content
SAU Community

Recommended Posts

hey guys,

just doing some research before i get a set of G4 coilovers from just jap :D

i basically want a set that will go the lowest in ride height

its just for a street driven skyline R33 so spring rate cant be too stiff

basically ive looked around and the Tein coilovers dont drop the car height as much as the G4's so im asking if anyone knows of any brand coilover's that will drop the car lower than the G4's (currently only drop it max 12cm from stock)

looks like this on the lowest setting:

post-65527-12023037001577317582.jpg

you help is most appreciated :)

thanks

hey guys,

just doing some research before i get a set of G4 coilovers from just jap :)

i basically want a set that will go the lowest in ride height

its just for a street driven skyline R33 so spring rate cant be too stiff

basically ive looked around and the Tein coilovers dont drop the car height as much as the G4's so im asking if anyone knows of any brand coilover's that will drop the car lower than the G4's (currently only drop it max 12cm from stock)

looks like this on the lowest setting:

post-65527-12023037001577317582.jpg

you help is most appreciated :)

thanks

If you are planning on driving it around that low spring rates won't matter anyway as you are more or less on the bump stops.

I gather handling is not an objective.

Ever thought of bags?

hey guys,

just doing some research before i get a set of G4 coilovers from just jap :)

Try doing a search, you will find feedback from quite a few guys who have tried and rejected G4's

i basically want a set that will go the lowest in ride height

The limit on height is not what spring/shock unit you use. What stops you is the suspension geometry, it turns to shit.

its just for a street driven skyline R33 so spring rate cant be too stiff

Impossible, the lower you go the higher spring rate you must have. Springs absorb impacts, from bumps, speed humps, pit holes, ripple strips etc etc. As you shorten the spring you reduce the amount of travel to absorb those impacts. If you run a soft spring rate it simply doesn't have enough resistence to absorb the impact and it slams into the bumps stops, pretty soon destroying them. Then the shock bottoms out and destruction of the internal valving occurs. There is no nothing to abosrkb the impacts so they are passed directly into the chassis, which starts to crack around the mounts. One day the cracks join up and a shiocjh shafts stick up though the bonnet.

basically ive looked around and the Tein coilovers dont drop the car height as much as the G4's so im asking if anyone knows of any brand coilover's that will drop the car lower than the G4's (currently only drop it max 12cm from stock)

Simple, remove springs and shocks and replace with 4" x 2" piece of timber, cut timber to desired height.

looks like this on the lowest setting:

Evil handling, dangerous, slow accelerating and has no braking performance to speak of. But hey it looks good, to the uneducated, the rest of us laugh our heads off. :laughing-smiley-014: :laughing-smiley-014: :laughing-smiley-014:

Cheers

Gary

ok.. thanks for that. I will keep it in mind...

and ive did a search and read about the G4's being really stiff.. :P

edit** just realised 120mm is 4.7" lower from stock which is enough for me :)

thanks guys!!

looking for second hand set if anyone has one before i get a new set off just jap :D

thanks again!

Edited by McDrifto

freind of mine bought g4's for his car u13 bluebird (now sold) they werent all that stiff and they were extremely low and nowhere near the lowest setting.

but why would you want it that low?? would be a pain to drive you would have to stop at every speed hump and driveway.

ok.. thanks for that.

ive did a search and read about the G4's being really stiff..

more interested in the ride height :P

Maybe I wasn't blunt enough, you can't have an R33GTST that height (as in the picture) and expect anything other than very rough ride. That's the facts.

Cheers

Gary

thanks gary i edited my post and also read up on your posts on other threads when i did a search :D

basically i want a 2" drop from stock for street driving then be able to adjust it to be decked for show :P

wasnt planning on driving that low 24-7 :)

basically i want a 2" drop from stock for street driving then be able to adjust it to be decked for show :P

Response amended. You can't have a 2" drop in an R33GTST and expect anything other than a rough ride.

Cheers

Gary

i've got buddy club coilovers in my r34, couldnt be happier. Gives a nice firm feel, and is dampner adjustable to soften it up if need be.

Has HEAPS of height adjustment, shits all over my bros teins in his r33, so for a show look you could dump it quite easily to the height in the photo, but like previously said, it would be on bump stops the whole time and would ride like poo which doesnt make any sence when you just spent 2k on decent suspension to make the car ride better

Go coilovers, not g4, and you'll be happy

If your interested I have a set of adjustable coil-overs in my GTR. At the moment I have them raised as high as possible and the car is just street legal. Droped down they would give you the kind of look your after. Not sure about the tyre wear though. Let me know if your interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...