Jump to content
SAU Community

Recommended Posts

Item: Series 1 R33 RB25DET 130,000kms

Price: $1000ono head is off so will require new head gasket and manifold gaskets

Location: Southside of Brisbane, It is sitting on a pallet to be shipped if needed

Contact: PM

Comments:

Decided to do my RB30DET Conversion

Complete long motor including Turbo/Plenum/Split dump

Always run clean and looked after blew no smoke

Fueled with BP Ultimate or Shell V-Power Racing - Always!

Serviced every 5K with Royal Purple and new Oil filter

Motor recently had a standard 100K service

Including:

New Genuine Water pump and HKS Timing belt

New Exhaust Manifold studs nuts and gasket

Good condition coil packs and NGK Iridiums

Turbo has got next to no shaft play and seems in great condition

Effortless 190rwkw with the power fc tuned running 12psi (never run more than 12psi)

Considering breaking it down: EOI Pm me

Head $580

Short Motor $280 Perfect working order when removed

Coil packs (awesome Condition) with loom $100

R33 Turbo/Mani/Split Dump (manifold has some sort of black heat coating and new studs looks schmick) $520

Plenum Throttle Body assembly $50

Stock Air Box $150

Stock cooler pipes $50

Aircon $120

Powersteering pump $120

Starter Motor $??

R32 Loom $??

R32 RB25DE NA Computer $100

R33 RB25DET Computer $140

R33 Air Flow Meter (AFM) $120

Carbon Canister $20

Near New (500kms) HKS Timing belt $80

Near New Genuine Nissan Water Pump $40

Brand new Genuine NISMO Short shifter $??

Brand new Genuine Nissan Timing belt $90

Can deliver to Goldcoast / Ipswich / Northside Brisbane for Beer (whole motor only)

Edited by dano4127
Link to comment
https://www.sau.com.au/forums/topic/205620-series-1-r33-rb25det-brisbane/
Share on other sites

I have ECU's, Did you want R32 RB25DE or R33 RB25DET?

Want to sell the turbo included with the motor

Pm me if your interested

Edited by dano4127
I have ECU's, Did you want R32 RB25DE or R33 RB25DET?

Want to sell the turbo included with the motor

Pm me if your interested

how much would u charge on the R33 RB25det ecu

BUMP - Still here! Considering breaking it down if I can get rid of it quickly

Open to serious offers :banana:

Edited by dano4127

interested in the head as long as its in good nick, no offence but ure asking price is way too high for me, if ure willing to lower it we may be able to come to some arrangement, cheers Damo

Nismo Short Shifter? how much? is it new or used and does it come with all the bits to fit it to a R33 GTST?? thanks PM me with how much sent via express post to gold coast.

Edited by SLYDA

hey, im interested in the head. is it in good condition after blowing the gasket. and does it come complete. cams valves covers etc. if so i will pick it up in the next few days. where bouts in brissy are you. im on the gold coast if we maybe could meet half way

let me know

cheers

  • 1 month later...
  • 6 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...