Jump to content
SAU Community

Petrol Gauge Not Working

drftr32

By drftr32,
in General Maintenance

 Share

Recommended Posts

drftr32 Contributor

drftr32

Posted
Posted (edited)

bought my car about a week ago and it was about a 3rd full. filled full tank then drove 200 klms n gauge didnt move filled full tank again and only drove it 50 klms so far but gauge doesnt seem to move. took to my mechanic and he said it looks like it has moved a bit but wont be able to tell 4 sure coz so much petrol still left. is this a common problem n how do i fix it. Probably shud add ive got a 93 r33 gtst.

Edited by drftr32
Link to comment
https://www.sau.com.au/forums/topic/205798-petrol-gauge-not-working/
Share on other sites
uneek Enthusiast

uneek

Posted
Posted
yeah wen i picked it up it was about 1 third left n wen i test drove it it was almost empty. how wud i fix it if it is the float.

Im wondering if I have a similar problem. When I test drove my R33 it was EMPTY, literally felt it chug and went straight for the nearest servo. Bought it a few days later and filled it up. I've done 100kms and it hasn't moved from FULL.

Let me know how you go. I've seen other cars do this sort of thing but then head towards empty really fast.

adam-__- Grand Master

adam-__-

Posted
Posted

Try taking out the fuel sender from the fuel tank. Check if everything is functioning right. Get a multimeter out and check the resistance at each position the floater can go in to see if the resistance is increasing/decreasing at a constant rate. Where the floater would be when full tank of fuel, the resistance should be at its least, higher when floater gets to its low fuel area.

Hope that helped or even made any sense.

drftr32 Contributor

drftr32

Posted
  • Author
Posted

only had the car 4 like 290klms. wen i first drove it i thought petrol was awesome gauge goin nower den i did 210klms den thought dis is f*kd so full tanked it again n used exactly 30liters. so roughly 15l p 100 kays. i did give it a few hrd goes in dat time but does dis sound right and does any1 hav any idea da actual size of da tank coz if i cant get it fixed ill have to guess like my sis does in her sprinter.

uneek Enthusiast

uneek

Posted
Posted
Try taking out the fuel sender from the fuel tank. Check if everything is functioning right. Get a multimeter out and check the resistance at each position the floater can go in to see if the resistance is increasing/decreasing at a constant rate. Where the floater would be when full tank of fuel, the resistance should be at its least, higher when floater gets to its low fuel area.

Hope that helped or even made any sense.

Hey, how do you take the fuel sender out?

hojak Proficient

hojak

Posted
Posted
Hey, how do you take the fuel sender out?

In your boot, under carpet, should be like a aluminium cover and wiring harness going into this, take cover off, remove harness plug, there's the fuel sender. It's either held in by many 10 or so mm bolts or one big plastic/steel nut that holds the whole fuel sender unit down. Haven't taken one out of a skyline yet, sometimes takes abit of manuvering to actually get the sender unit out, careful not to bend the float arm. (take note how/where it sits before u remove it, making it sit differently when refitting may affect sender unit's float sensor (baffle plate may obstruct it from moving fully down, etc)). Final point, try not to enjoy the fumes too much, haha. :laughing-smiley-014:

adam-__- Grand Master

adam-__-

Posted
Posted
In your boot, under carpet, should be like a aluminium cover and wiring harness going into this, take cover off, remove harness plug, there's the fuel sender. It's either held in by many 10 or so mm bolts or one big plastic/steel nut that holds the whole fuel sender unit down. Haven't taken one out of a skyline yet, sometimes takes abit of manuvering to actually get the sender unit out, careful not to bend the float arm. (take note how/where it sits before u remove it, making it sit differently when refitting may affect sender unit's float sensor (baffle plate may obstruct it from moving fully down, etc)). Final point, try not to enjoy the fumes too much, haha. :laughing-smiley-014:

Yeah, it should be something along the lines of that. I haven't actually taken one out of a skyline yet before either. Only in my corolla.

If you're getting inaccurate readings, there could be some rust on the contacts. Clean them off gently and it should all go well.

adam-__- Grand Master

adam-__-

Posted
Posted
sounds like too much for me to handle. ill just get my mechanic to sort it out lol.

It's seriously not all that hard mate. Not worth the money you'll be paying. Just take out the sender and see if you can find anything wrong with it. See if the floater has fuel in it (not supposed to) or if any rust as built up. If you can't find what's wrong with it, then bring the car to the mech.

inthisglass Grand Master

inthisglass

Posted
Posted
I think my guage is faulty as well, it seems to fall too quickly. According to the gauge, I need to fill up every week, and last friday I used half a tank in one night!! That can't be right...

your not serious are you? baha a tank a week is pretty darn good, i get 500 km to one tank (55l in an r33 not 65)

and if your thrashing it around half a tank in a night is very easy.

i think drive your car for a while before you decide things are broken.. when i fill up my gauge will say on full till about 150 kms then suddenly drop to 3/4 full. same with my cousins and a few other people i have spoken to.

uneek Enthusiast

uneek

Posted
Posted
your not serious are you? baha a tank a week is pretty darn good, i get 500 km to one tank (55l in an r33 not 65)

and if your thrashing it around half a tank in a night is very easy.

i think drive your car for a while before you decide things are broken.. when i fill up my gauge will say on full till about 150 kms then suddenly drop to 3/4 full. same with my cousins and a few other people i have spoken to.

Im no skyline expert, but Im pretty sure you'll find it is 65L, not 55.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...