Jump to content
SAU Community

Recommended Posts

bought my car about a week ago and it was about a 3rd full. filled full tank then drove 200 klms n gauge didnt move filled full tank again and only drove it 50 klms so far but gauge doesnt seem to move. took to my mechanic and he said it looks like it has moved a bit but wont be able to tell 4 sure coz so much petrol still left. is this a common problem n how do i fix it. Probably shud add ive got a 93 r33 gtst.

Edited by drftr32
Link to comment
https://www.sau.com.au/forums/topic/205798-petrol-gauge-not-working/
Share on other sites

yeah wen i picked it up it was about 1 third left n wen i test drove it it was almost empty. how wud i fix it if it is the float.

Im wondering if I have a similar problem. When I test drove my R33 it was EMPTY, literally felt it chug and went straight for the nearest servo. Bought it a few days later and filled it up. I've done 100kms and it hasn't moved from FULL.

Let me know how you go. I've seen other cars do this sort of thing but then head towards empty really fast.

Try taking out the fuel sender from the fuel tank. Check if everything is functioning right. Get a multimeter out and check the resistance at each position the floater can go in to see if the resistance is increasing/decreasing at a constant rate. Where the floater would be when full tank of fuel, the resistance should be at its least, higher when floater gets to its low fuel area.

Hope that helped or even made any sense.

only had the car 4 like 290klms. wen i first drove it i thought petrol was awesome gauge goin nower den i did 210klms den thought dis is f*kd so full tanked it again n used exactly 30liters. so roughly 15l p 100 kays. i did give it a few hrd goes in dat time but does dis sound right and does any1 hav any idea da actual size of da tank coz if i cant get it fixed ill have to guess like my sis does in her sprinter.

Try taking out the fuel sender from the fuel tank. Check if everything is functioning right. Get a multimeter out and check the resistance at each position the floater can go in to see if the resistance is increasing/decreasing at a constant rate. Where the floater would be when full tank of fuel, the resistance should be at its least, higher when floater gets to its low fuel area.

Hope that helped or even made any sense.

Hey, how do you take the fuel sender out?

Hey, how do you take the fuel sender out?

In your boot, under carpet, should be like a aluminium cover and wiring harness going into this, take cover off, remove harness plug, there's the fuel sender. It's either held in by many 10 or so mm bolts or one big plastic/steel nut that holds the whole fuel sender unit down. Haven't taken one out of a skyline yet, sometimes takes abit of manuvering to actually get the sender unit out, careful not to bend the float arm. (take note how/where it sits before u remove it, making it sit differently when refitting may affect sender unit's float sensor (baffle plate may obstruct it from moving fully down, etc)). Final point, try not to enjoy the fumes too much, haha. :laughing-smiley-014:

In your boot, under carpet, should be like a aluminium cover and wiring harness going into this, take cover off, remove harness plug, there's the fuel sender. It's either held in by many 10 or so mm bolts or one big plastic/steel nut that holds the whole fuel sender unit down. Haven't taken one out of a skyline yet, sometimes takes abit of manuvering to actually get the sender unit out, careful not to bend the float arm. (take note how/where it sits before u remove it, making it sit differently when refitting may affect sender unit's float sensor (baffle plate may obstruct it from moving fully down, etc)). Final point, try not to enjoy the fumes too much, haha. :laughing-smiley-014:

Yeah, it should be something along the lines of that. I haven't actually taken one out of a skyline yet before either. Only in my corolla.

If you're getting inaccurate readings, there could be some rust on the contacts. Clean them off gently and it should all go well.

sounds like too much for me to handle. ill just get my mechanic to sort it out lol.

It's seriously not all that hard mate. Not worth the money you'll be paying. Just take out the sender and see if you can find anything wrong with it. See if the floater has fuel in it (not supposed to) or if any rust as built up. If you can't find what's wrong with it, then bring the car to the mech.

I think my guage is faulty as well, it seems to fall too quickly. According to the gauge, I need to fill up every week, and last friday I used half a tank in one night!! That can't be right...

your not serious are you? baha a tank a week is pretty darn good, i get 500 km to one tank (55l in an r33 not 65)

and if your thrashing it around half a tank in a night is very easy.

i think drive your car for a while before you decide things are broken.. when i fill up my gauge will say on full till about 150 kms then suddenly drop to 3/4 full. same with my cousins and a few other people i have spoken to.

your not serious are you? baha a tank a week is pretty darn good, i get 500 km to one tank (55l in an r33 not 65)

and if your thrashing it around half a tank in a night is very easy.

i think drive your car for a while before you decide things are broken.. when i fill up my gauge will say on full till about 150 kms then suddenly drop to 3/4 full. same with my cousins and a few other people i have spoken to.

Im no skyline expert, but Im pretty sure you'll find it is 65L, not 55.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...