Jump to content
SAU Community

Recommended Posts

hey all.

mates got a 4 door r33 gtst which started stalling yesterday.. since he put on a dump pipe.. it only stalls when at idle, drives the same, a bit extra power.

what happens is that it stalls after 10-30 secs of idling... otherwise it drives fine.

mods:

FMIC

Full exh

pod filter

stock boost(7~psi)

wasted spark setup

HKS bov(working fine before)

weve tried to unplug the aac valve, and that doesnt make a diff.. the lambda sensor is unplugged, it doesnt make a diff even if plugged in(as its only for fuel economy anyway)

any ideas? weve tried resetting th ecu. all the plugs seem to be in place and nothing loose.

Help??

Link to comment
https://www.sau.com.au/forums/topic/205909-r33-stalling/
Share on other sites

I don't care if the BOV was working before, I bet its causing the problem.

Take the Piece of junk off and put a plumb back on, or put up with the stalling.

Do a search for stalling and you'll find plenty of threads.

Link to comment
https://www.sau.com.au/forums/topic/205909-r33-stalling/#findComment-3643708
Share on other sites

I say it is the bov I had that problem when I got mine installed. Basically mine would stall every now and then but xspeed sort of fixed the problem by adjusting the the car to idle at about 900-1000 rpm instead of 600 rpm. Did not work 100% but heaps better. The only way to fix it 100% is get one that is plumbed into the car.

Link to comment
https://www.sau.com.au/forums/topic/205909-r33-stalling/#findComment-3644202
Share on other sites

why would the bov cause the car to stall AFTER it's been idling for 10-30 seconds?

I'm a hater of bovs as much as the next guy but it doesn't make sense.

When it stalls, is it sudden?

as in, does it idle along perfectly then completely cuts out, or do the revs drop a little and car starts to splutter, then stall?

Is the car auto or manual?

Link to comment
https://www.sau.com.au/forums/topic/205909-r33-stalling/#findComment-3644556
Share on other sites

thanks for the replies guys! :blush:

well.. say ur idling in the carpark with the keys in the ignition.. after 10-30 secs it will struggle ALL of a sudden.. seems like the spark is there, the fuel is there but it stalls. seems like a sensor or something is all of a sudden...

i will try putting on my stock bov tonight if i have time.

i also have my suspicion on the bov but then im not 100% on it.

Link to comment
https://www.sau.com.au/forums/topic/205909-r33-stalling/#findComment-3644962
Share on other sites

I'm going to suggest the AFM.

my 200sx did this on occasions.

the cable to the AFM on my car was dodgy and would sometimes cause a temporary bad reading. enough to cause it to drop revs, then back up and sometimes just struggle for 2 seconds then stall.

see if you can force it to happen.

pop the bonnet.

start the car.

then move your afm cable around.

or even move the afm around (if you have a pod filter instead of stock airbox).

in the DIY section of these forums, do a search for "AFM+SOLDER" to find the thread on how to repair a faulty AFM.

also, if you haven't already done so, take the AFM off and spray the inside with electric contact cleaner.

this will clean off any oily shit and dirt that might be there causing the problems.

spray on and it's clean and dry within 20 seconds.

The soldering is also pretty easy..

have a search/read

Link to comment
https://www.sau.com.au/forums/topic/205909-r33-stalling/#findComment-3645099
Share on other sites

yeh i had my suspiscion on the afm as well, however it runs fine so that kinda rules it out, but ill have a play around either tonight or tmorw.

i sent him to my tuner today so hopefully he can give him some tips.

would a clogged up aac valve do this? i dont think so, as the aac valve is only good for when cold right?

Link to comment
https://www.sau.com.au/forums/topic/205909-r33-stalling/#findComment-3645126
Share on other sites

idle is BOV - its probably got a really small fluctuation that is causwe the bov to open and shut a little bit. Then after a while he BOV opens and shuts a little bit more and more each time, then eventually after 20 seconds, its opening too much on idle and you start to notice how much your piece of shit BOV is making the car run like a dog.

Take it off and I bet the problem is fixed.

Or prove me wrong, and put a piece of coke can inbetween it and block it off completely and tell me if it stops idling bad.

Link to comment
https://www.sau.com.au/forums/topic/205909-r33-stalling/#findComment-3645350
Share on other sites

alright so my tuner just had a look at it.. reckns its the aac valve..

thing is now that it idles at 2000rpm and doesnt stall as often.. maybe say 2/5 times only. so were gna quickly clean out the aac tonight, if that doesnt fix it ill chuck on my stock bov. :happy:

Link to comment
https://www.sau.com.au/forums/topic/205909-r33-stalling/#findComment-3645447
Share on other sites

alright so my tuner just had a look at it.. reckns its the aac valve..

thing is now that it idles at 2000rpm and doesnt stall as often.. maybe say 2/5 times only. so were gna quickly clean out the aac tonight, if that doesnt fix it ill chuck on my stock bov. :happy:

lol and once you have put the stock bov back on might want to lower the idle back to normal. 2k is just silly

Link to comment
https://www.sau.com.au/forums/topic/205909-r33-stalling/#findComment-3645874
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...