Jump to content
SAU Community

Wtb-sa/vic- R33 Bits- (manual Box, Glass, Performance Bits)


Recommended Posts

WTB the following bits to suit S1 r33 skyline.

able to travel to melbourne, or adelaide.. and anywhere between to pick bits up.

-5speed manual gearbox

-brake master cylinder

-clutch cylinder and lines.

-LHRear "quarter glass"

-front window (no antenna one)

other bits im after, but no big rush on///

-heavy duty excedy clutch kit and flywheel

-"greedy" style inlet manifold

-decent headgasket and arp(spl?) headstuds

-25mm bolt on spacers. hub centric.

im located in Mt Gambier SA.

pretty much have cash waiting on the box n clutch, master cylinder, and the glass.... the other bits are no big rush...

as above, am able to travel to melbourne or adelaideto pickup larger items.

contact me via PM on here, email ([email protected]) orrrr sms me on 0431535745

bump up.

cheers for the PMS.

will confirm when i know for sure whats going on with some bits.

also will confirm if the cars abs, 2mrw morning :yes:

bump on top.

have all of the bits in this thread

http://www.skylinesaustralia.com/forums/ad...3-to206243.html

for swap+cash for bits i need as above...

Desperate need for the GBOX and FLYWHEEL. ASAP>

will be in adelaide on the 15th (ish) of march, for G1, can pick up then...

otherwise ill be going to nisswreck lol :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...