Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

You'll have to weld some flanges on to fit it.

And yeah it doesn't get that quiet by making power! Puts out a crazy rasp at high revs. Still a well designed muffler though so not TOO restrictive.

I really paranoid about driving with it closed. So I just take it nice and easy.

yea, so after say a year. the flange will have carbon build up.

so if the butterfly valve gains a bit of carbon, even with it open, it will still restrict the exhaust.

so a 3'' will be basicaly 2.50. this is my problem. have been thinking about this problem for a while.

a clear exhaust =loud

an impaired exhaust= quiet but restrictive :S

forgive my ignorance, is this item flanged?

incase i wanted to go back to my zetti muffler??

edit: is there any backpressure problems when diverting the gas flow thru a 1'' hole!!!!!!!!!

Yep, flanged.

Not sure what you mean with 1" hole - or do you mean when the valve is closed? If the latter then you simply go easy when it's closed, if you want to put the foot down - then open it to full.

OK...

I have my Varex fitted. Previously I had an Xforce cannon muffler (and resonator that was freaking me out due to it's close proximity to the ground), now fitted with a hot dog style resonator.

My first impressions are that overall, the Varex is quieter than my old cannon, even when wide open... but I've lost that horrible drone which was driving me nuts (yay).

I also went for the oval version with twin tips - this normally retails around $500 but I got it for $400 (long story :)

Performance affected?

Well, hard to tell after just the trip home from the exhaust shop... although I did do a semi-serious acceleration test from a standing start through to about 140km/h on a (mostly) lonely bit of highway - and it felt mostly the same as before. Might be a slight loss... hard to tell for sure until I get out there and try it again when it's all quiet. I suspect the turbo is spooling up a little higher in the rev range but again I'm not 100% sure yet.

One thing is for sure - it looks practically the same as the factory muffler and shouldnt get the cops all excited like the cannon did.

When set to quiet - it is damned quiet all right! In fact, all I can really hear is induction roar.

We spliced the wiring into the rear wiper power feed, so no need to run it to the bloody ciggie lighter...

Anyway, here is a quickie video I did which might help give you all a better idea of what it looks and sounds like. the first bit shows the old Xforce cannon muffler: http://au.youtube.com/watch?v=autQyxmR8N4

I might do a better video later on, as this video doesnt show the valve operating, or really show off the new muffler from all angles.

Edit - pic added:

post-46181-1204332899_thumb.jpg

Edited by Wayne_J
i woudlnt mind one of these if they came in 4" inlet

XForce have been saying the 3.5" versions are "coming"... although they've been "coming" for ages now.

I'll probably buy one when they eventually release them, and put my current on onto the Suby.

4" is kind of HUGE, isn't it?

wow a big difference... you can really hear the low end deep "bass" per say disappering when its closed up!

If i didnt have my HKS Silent Hipower i would get this one for sure.. =)

I was originally keen on the APEXi PS Revolution muffler... until I found out the retail price: $1700!

XForce have been saying the 3.5" versions are "coming"... although they've been "coming" for ages now.

I'll probably buy one when they eventually release them, and put my current on onto the Suby.

4" is kind of HUGE, isn't it?

not wen ur aiming for 350rwkw+ :domokun:

  • 3 months later...

Definately getting one of the twin tip ones. my ex has one of the cannon ones on her 33. sounds as quiet if not quieter than stock exhaust when the valve is closed and nice clean louder note when open and you dont get that annoying drone on the highway either.

Unreal thread guys, was looking for some more real world info on these things and bang there it is :) Think i might wait for the 3.5" version as well.

Great vids as well thanks guys

Cheers

I wouldnt hold my breath for the 3.5" version.

Theyve been saying theyre 'gunna' produce the 3.5" version for a long, long, long time now... I've no idea why this is so, you'd think it'd be a simple thing to do given all their other products and facilities.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...