Jump to content
SAU Community

Recommended Posts

I've started a new job recently which will mean when I'm fully trained I'll have to start at 1.30am. Meaning I have to leave my car alone in a shopping mall car park from 1.30am till 10.30am.

I have a Viper alarm system with immobilizer installed, and it's fully insured, but is there any extra security I can personally do? I heard someone saying they pulled their throttle plug when leaving their car in dodgy places. Is there a fuse or something simple that I can remove and replace easily that will stop the car from moving with doing damage?

Maybe I'm just being paranoid, as it's not a very valuable car to begin with, with quite a serious alarm system installed, but after reading all these theft articles I am a little concerned.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/
Share on other sites

try one of those steering wheel locks that needs a key to undo

or put a chain or something through your wheel? just like a bike lock but bigger?

if your working in the shop near where its parked wont you hear your alarm?

if you do, just put your security training to good use

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3652847
Share on other sites

All these security measures are good. But still dont stop people from trying... a smashed window and a FUBARed dash is going to be nearly as painful as losing the car.

I know you probably dont want to hear this but a good idea would be leaving the sky at home and trying to find another way to get there. Which i know would be hard since u start at 1.30am... Maybe a cheapo car that u use to work and home only?

or unless since u working at the mall when its shut... park it inside the mall! . that way its locked up... haha it may be a long shot but who knows?

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3652899
Share on other sites

i used to work security in a couple of shopping centres. most usually have at least a few carparks that are on camera. maybe find out where they would be at the centre u work at and park there. if the security guys there are ok to just ask them to keep an eye out for u when they patrol. i used to get those kinda requests all the time so i did. i mean it may not work for u but as i said its worth a try

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3657284
Share on other sites

  • 2 weeks later...

Some funny ideas reading this lol, if some1 wants ur car, tints, steering wheel locks and depending on how gud thief is some alarms are all useless. Best wud be a fill switch or 2, not to hard to put in, chuck it in fuse box under bonnet. Iv heard alot of things bout how cars a stolen etc, stil cant believe how to some ppl its so easy. Dont waste money on any locks or nething from autobarn etc, get kill switch or fuel cut, or another car lol

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3682757
Share on other sites

park under a bright light. when u leave, pop the boot and rip out the fuel pump or ign fuses.

REMOVE any precous objects from the car, dont give them an excuse to even think about it.

make sure that the alarm warning light is visible to all to see.

and finally, turn the volume and shock sensor up to MAX.. and u "might" be ok

Edited by r33cruiser
Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3689748
Share on other sites

Excuse my ignorance, but what is a fuel cut and a kill switch? Are they just switches hidden in your car that must be flicked on for the car to run? Can you buy them and install them, or is it just a custom wiring job you do yourself?

Also, how much would one of these cost to install?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3691280
Share on other sites

kill switch is like a master switch, its not an off on flick switch its like a pin with out the pin switch wont work, and depending how you wire it ie, you can use it as a fuel cut switch etc. some race cars have these, incase of accident or something they can pull the pin and then bang engine not goin no more lol switch isnt much cheep autotechnica one it around $10-$20 from memory and a beter bosch one is $30-$60

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3691306
Share on other sites

Doesnt matter how much u spend on security, its not going to stop someone trying to steal it.

People steal any cars these days. Skylines to poor people are a wet dream... full of goodies

My advice is if you have to leave your skyline out of sight for even 30mins, you should be expecting the worse.

Buy a shit heap and drive that to work.

Edited by Antone
Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3691637
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...