Jump to content
SAU Community

Recommended Posts

My 32 gtr makes a wierd rattle/hum/buzz kindof sound when i put down the passenger window

It sounds as if its coming from the rear passenger side wheel,

asked my mech to look at it but he said nothing about it, prob didnt check it at all :P

has anyone experiences a similar noise

or have any ideas as to locate it and stop it, it annoys the s#!t out of me!! :rofl:

Link to comment
https://www.sau.com.au/forums/topic/206984-gtr-rattles/
Share on other sites

Road speed dependant?

Engine speed dependant?

Gear dependant?

Can a passenger hear it?

Constant, or changes with angle of wheels?

Can it be heard by a friend when you drive past them?

Does the car have to be cold (ie mornings) when it does it? Or all the time?

I find that 50% of the time my audio guy finds rattles/sounds that my mechanic can't, he knows I hate rattles etc.

If you can repeat it reliably, take your mechanic for a drive to show him.

If the sound happens when the car is just coasting out of gear, that's the easiest to hear, because less noise in the car.

I sometimes get my brother to get in the back and hold his hands against things until rattles stop, then I at least know where to direct my audio guy.

Hopefully it's not a mechanical problem, and just something cheap like noisy trim.

Link to comment
https://www.sau.com.au/forums/topic/206984-gtr-rattles/#findComment-3661906
Share on other sites

can only hear it when the passenger window is down

generally it happens approx above say 40km/h

and you can hear it more when no throttle, but still rolling in gear

i suspect its a vibration of some kind

the passenger in the car can hear it and they suspected the rear wheel

but i cant seem to see anything loose or snythin

Link to comment
https://www.sau.com.au/forums/topic/206984-gtr-rattles/#findComment-3663671
Share on other sites

I wouldn't think a tonal resonance from having the window down, is going to make your wheel create a noise :rofl:

A few different trim panels terminate and fasten near the rear wheel arch and C pillar. Its most likely one of thems. As Insomniac said, get someone to press panels with the sun roof down, locate then fasten.

Edited by GeeTR
Link to comment
https://www.sau.com.au/forums/topic/206984-gtr-rattles/#findComment-3665456
Share on other sites

ok

i was trying to suss this out today

i took the rear wheel off, and nothing loose or anything there, and i banged it around to see if there was anythin inside that could be rattlin

then i got a mate to drive and i opened the pass door and hung out trying to locate the noise

it definitely comes from under the car, souns like its coming from near the back of the side skirt

we even went as far as filming under the car to see if anthing was moving around, and could not see anythin in the foorage :D

it appears that some of the heat shielding may be loose, but thats toward the front of the car :D

maybe its an excuse to get a new exhaust system, i think there may be somethin in the exhaust making the noise????

anyone??

Link to comment
https://www.sau.com.au/forums/topic/206984-gtr-rattles/#findComment-3667026
Share on other sites

"Heat shield and exhaust rattle caused by opened window?"

Iv missed the correlation; no way, can i imagine that occurring.

I still think it can only be pressure, or pressure oscillations (resonance) doing it. Many cars have vents from the boot space to behind the rear bar (right behind the rear wheel) If pressure is trying to equalize in that area, maybe there’s a panel, or rear bar movement.

I'm massively interested now to find out what this noise is!

Keep persisting!

Link to comment
https://www.sau.com.au/forums/topic/206984-gtr-rattles/#findComment-3668111
Share on other sites

kindof like a humming/buzz noise

i suspect it may be loose sh!t in the sideskirt

but i tried to unscrew it but i think they are glued on also :D

are you sure it's not the wear indicator spring tabs on the brake shoes that are catching on the disk because the pads are worn mine was doing it on the rear of my gtr it was driving me crazy they are meant to make an annoying noise to alert you ...i took me ages to find this out

Link to comment
https://www.sau.com.au/forums/topic/206984-gtr-rattles/#findComment-3706711
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...