Jump to content
SAU Community

Recommended Posts

Hey guys. From yesterday, after i used the aircon after bout 2 weeks, Everytime start the car, i get this weird banging noise from behind the 2 vents in the middle of the dash. It goes for bout 10 secs then stops. It hapen now, everytime the key hits accesories. Wat could it be?

Link to comment
https://www.sau.com.au/forums/topic/207203-wat-could-it-be/
Share on other sites

<br />covered b4..<br />its some worn out gear<br />
<br /><br /><br /><br /><br />Ive got a quick fix for that problem<br />To get rid of that annoying tapping sound everytime you turn the ignition on.<br />Take out the contol unit for the fan/aircon located above your stereo.There will be two plugs in the back of the unit.Now if your sitting in the drivers seat of your car looking at the unit .... the right plug is the plug you want.On this plug there will be about 17 wires,the red wire(maybe an orange stripe on it as well ...cant remember) furthest to the right is the one that sends power to the servo with the stripped gear.<br />Cut this wire and you will no longer have that annoying tapping sound.<br />If you want to pull the whole dash apart and replace the stripped gear then you have alot more time on your hands than me<br />this guide is for a r33 gtst<br />hope this helps Edited by r33gts4turbo
Link to comment
https://www.sau.com.au/forums/topic/207203-wat-could-it-be/#findComment-3668711
Share on other sites

  • 3 months later...
<br /><br /><br /><br /><br />Ive got a quick fix for that problem<br />To get rid of that annoying tapping sound everytime you turn the ignition on.<br />Take out the contol unit for the fan/aircon located above your stereo.There will be two plugs in the back of the unit.Now if your sitting in the drivers seat of your car looking at the unit .... the right plug is the plug you want.On this plug there will be about 17 wires,the red wire(maybe an orange stripe on it as well ...cant remember) furthest to the right is the one that sends power to the servo with the stripped gear.<br />Cut this wire and you will no longer have that annoying tapping sound.<br />If you want to pull the whole dash apart and replace the stripped gear then you have alot more time on your hands than me<br />this guide is for a r33 gtst<br />hope this helps

will the aircon still work and how do i know if that is the right wire please help this noise is driving me nuts

Edited by Turbo 33
Link to comment
https://www.sau.com.au/forums/topic/207203-wat-could-it-be/#findComment-3963448
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
×
×
  • Create New...