........

[twin_spinner]

............

Edited February 29, 2008 by twin_spinner

[mad082]

a 3076 will bolt up to a standard manifold, but you may need some oil fittings.

as for the ecu, any aftermarket ecu will do the trick. you are best of asking the person who is going to tune it what they prefer. by using what they know the best you will get the best tune from them. if u get something they aren't familiar with you won't get as good of a result.

and i think a 3076 might be a bit big for a rb20 unless you are chasing big power. it will partly depend on what housing size you get.

but i don't know that much about what turbo is suitable for rb20's.

[Bunta]

It does fit on the standard manifold...but by about 2mm you are best off getting a spacer made up to give the compressor a bit more clearence, apart from that you may need new oil and water lines and the intake will need to be jigged slightly

[twin_spinner]

If that turbo is to big what is another direct bolt up suggestion?

In brisbane who is th ebest skyline tuner and waht ecu do they prefer to use?

[mad082]

It does fit on the standard manifold...but by about 2mm you are best off getting a spacer made up to give the compressor a bit more clearence, apart from that you may need new oil and water lines and the intake will need to be jigged slightly

actually the spacer you need is about an inch thick. i installed a 3076 on a mates 33. and you will need a new intake pipe as the compressor housing needs a 4" intake , and you need to make a few mods to the 'hot' cooler pipe.

a good bolt up replacement is a highflowed r33 turbo from gcg. they are a 100% factory fit, but as your turbo isn't standard some of the oil and water lines may have been altered, but a trip to a local hose place should sort you out.

[Bunta]

ya an inch thick is what mine was too! i was saying it did 'fit' straight on to my manifold by 2mm but it was deemed more clearence would be wise ha ha

Im gonna be unoriginal and say that a GTRS or garret equivalent would be good on a RB20, cause the 3076 on my car felt a little laggy and that was with a 25

[mad082]

yeah i found the 3076 a bit laggy on my mates car too. although his engine had 'issues' but it still made 251kw at 16psi.

[Simon-S14]

3071R for a rb20.. hell i run one on my 25 and its awesome!