Jump to content
SAU Community

Recommended Posts

Hi all

R34 GTT 2 door coupe coilovers - Aus spec Tein Super Streets

They are in excellent condition, no leaks, nothing broken, nothing is wrong with them. I still have the original Tein stickers, C-spanners, allen keys, documentation, everything!

They were bought from Wholesale Suspension in Penrith and fitted by them.

Fulcrum Suspension spec. So are valved for Australian conditions as they are advertised. RRP was $1850 when I bought them.

I've done 11000kms on them. You still have 29000kms/1 year warranty from Wholesale and Fulcrum on these. If there is an issue, simply get it checked out and make your warranty claim. Easy. I can provide you the Fulcrum warranty certificate and receipts.

Spring rates are 5k front and 4k rear which are very decent rates, and they handle superbly. Very very predictable. They also allow a good deal of adjustment, I have my car at the momment at 345mm all around, and I am sure it can go lower another 10-15mm if needed. Else you could even run them at stock height. They have 16 damper settings.

Selling as returning car to stock.

$1000

PM me or call on

post-7128-1203837732_thumb.jpg

post-7128-1203837843_thumb.jpg

post-7128-1203837955_thumb.jpg

post-7128-1203837985_thumb.jpg

post-7128-1203838060_thumb.jpg

post-7128-1203838081_thumb.jpg

post-7128-1203838103_thumb.jpg

post-7128-1203838133_thumb.jpg

post-7128-1203838145_thumb.jpg

post-7128-1203838156_thumb.jpg

  • 1 year later...

hi i was wondering if you still have these coilovers still i have got a r34 gtv which is non turbo would it fit on my car if it does i will give you 700 cash straight away plz msg back asap thanks or pm me

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...