Jump to content
SAU Community

Recommended Posts

well if you have 19s on a 33 it can be defectable as 18s are the biggest you can go. im pretty sure different size rolling diameter is illegal too. whatever state you in, check the on the state roads website for the rules and regs.

my moneys on defect. but hey... every mods pretty much a defect nowadays. :)

Edited by jake33

There shouldn't be a big difference in rolling diameter if you're using the correct tyres.

I'd say that they're illegal. I remember someone saying something about if you've got 225mm tyres all round, you can't go larger in the rear and not the fronts. They must stay the same width (all four 235, 205, etc), but if they came with 255's in the rear and 235's in the front, then you can go what ever you like in the rear and front (doesn't matter if they're not the same). I would say that it's the same for rim diameter. If your car came with 16's in the rear and 15's in the front then it would be legal. I'm not saying that this is the law, it could be complete bullshit (I think it is), just thinking out loud.

you'd be dumb to put it on an AWD

there was a topic bout a ferrari with 20" front and 22" back a while ago

unless you got adjustable suspension your car'll look like it just got anal probed

you'd be dumb to put it on an AWD

there was a topic bout a ferrari with 20" front and 22" back a while ago

unless you got adjustable suspension your car'll look like it just got anal probed

he has a gts-t...

if he got the right tyre profiles should sit evenly i think.

not sure if it helps, but a chrysler crossfire has bigger rear wheels from factory,

I think 18" front and 19" rear

I think the rule in NSW is that you can't go 1" bigger than factory and something to do with the width of the rim

Edited by Yo-Yo

Why not just go 18's all round? or 19's all round. Would probably be cheaper aswell.

Most ppl only do the 'smaller at the back, bigger at the front' So they can lower the car heaps and still be able to turn the front wheels yet fill out the guards.

But ive yet to see anyone do it with 18's as its too small to fill out the guards to the extent of rubbing.

i was just pondering the idea, i saw a few pics of a s15 with 18's on the front and 19's on the back and it looked really good. also theres some mags i like, except the 18" one only come in 8" width, but the 19"'s come in 8" and 9.5". so i was thinking maybe 18" by 8" on the front and 19" by 9.5" on the rear. just checking out all my options before i buy :D

Most people get smaller wheels out back because of cheaper tyre costs and larger wheels at front to clear their massive brakes. Usually see 17's out back and 18's up front.

If you get the right profile tyres, nothing/not much should happen to the speedo. Having 19's at the back and 18's up the front is no different to having 19's all round or 18's all round if you've got the right profile tyres.

It will depend what state you are in. Check with the transport department & get it in writing if you can, so you can proove your innocence when you get pulled up.

thats my advice.

There was an MR2 with 19's on the rear and 18's on the front. I think it was in one of the Video Option dvd's... Looked pretty good.

I doubt it's a legal requirement to have all wheels the same including the spare. Think of all the cars with space savers.... including Skylines...

In saying that. check first.

I reckon you could easily get away with it, as only 1 inch difference would be hard to spot by the authorities. My R33 has been running around on 19x10's and 20's for around 2 years, and yet to have a problem with the coppers..but i guess as with most things these days its the risk you take..

If you want to go 19's in the rear and 18's up front, just do it. Chances are you'll probably get dicked for having tyres that are too wide or you increased your track by more than the legal limit anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...