Jump to content
SAU Community

Recommended Posts

Hi guys

Make:nissan

Model:skyline r32

Milage:135k

Transmission:manual

Colour:black

Location:mackay qld

Complied?yes

RWC supplied?yes

Currently registered?yes

Contact:pm me or email [email protected]

Comments / Modifications:

the time has come to sell the r32 and get somthing a bit newer.

The car has 132 000klms on it 5speed turbo manuel.

mods include

GCG high flowed turbo

stainless manifold

walbro fuel pump

fmic

greddy oil catch can

engine dampaner

full 3inch turbo back zorst

HSD HR coilovers

castor rods

front and rear camber arms

front strut brace

tie rod ends

solid cradle bushes

18inch wanna be gtc's

oil filter relocation kit and oil cooler

new npc 5 puck ceramic button clutch

dvd headunit with 2.5inch screen and 7inch fold out

jvc 6inch 2 ways in the back 7x5s in the front

jvc 10inch sub and sony 600w 4channel amp

HKS SSQV the second version

most of witch are only 5000klms old.

$16,000 neg

might sound a bit steep but i am negotiable

post-35322-1203939792_thumb.jpg

post-35322-1203939875_thumb.jpg

post-35322-1203939932_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/207724-r32-skyline/
Share on other sites

  • 2 weeks later...
  • 3 months later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...