Jump to content
SAU Community

Recommended Posts

Does anyone know if you can get the factory seat cloth for GTR R32

I want to re trim my drivers seat in factory trim, and would like it if i could supply the fabric to the trimmer

Anyone know where u can get it from, or what its called, colour code etc??

Thanks heaps

Link to comment
https://www.sau.com.au/forums/topic/207874-r32-gtr-seat-cloth/
Share on other sites

I actually tried this awhile back, and it seems that gtr seat material isn't really consistent in colour due to rapid fading etc.

There actually isn't a colour that i could find that is the same. were many similar but not the same. So i had to retrim in another material/colour.

Also its quite expensive to retrim the seat itself about $300 labour alone excluding materials as the gtr seats are quite complex in design. And also because the seats material is all one piece, you will also need to replace the suede aswell, and if you go genuine suede its quite costly. Costed me about $700-$800 a seat for leather/suede seat retrim.

A GB on this would be good, but the thing is, it would have to be either:

Fabric ready to go

or

Fitted to the seat

And if its option 2 then has to be the one city.....actually ill try some places and see about doing one for sydney

^^ Is the seat really worn or just a few tears?

If tears then I get a few iron patches and glue it on. Thats what I did LOL!

If ya having trouble getting the fabric just buy a BRIDE Seat. LOL!

closest seat material to original macro suede type is probably 'alcantara' as used by lambo, audi, porsche, amg etc and available from Gineico in Sydney from memory about $110/m on a 1.4m wide roll. classic british and german in sydney have a similar product but slightly coarser and more expensive. there are similar alternatives but i can't vouch for them. alcantara is bullet proof hence why they use it on ferrys etc. as it is very wear and uv resistant. unfortunately due to fading and batch changes etc its unlikely you can ever match the original perfectly.

closest seat material to original macro suede type is probably 'alcantara' as used by lambo, audi, porsche, amg etc and available from Gineico in Sydney from memory about $110/m on a 1.4m wide roll. classic british and german in sydney have a similar product but slightly coarser and more expensive. there are similar alternatives but i can't vouch for them. alcantara is bullet proof hence why they use it on ferrys etc. as it is very wear and uv resistant. unfortunately due to fading and batch changes etc its unlikely you can ever match the original perfectly.

cool sounds like good info tho

i will see what i can do

i def want to re trim the seat but in factory gear :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...