Jump to content
SAU Community

Attn Black R33gtst Owner

Mr Sniper911

By Mr Sniper911,
in South Australia

 Share

Recommended Posts

Mr Sniper911 Community Regular

Mr Sniper911

Posted
Posted

Directed at the driver of Black R33 GTST Rego SKR-033

Mate,

Before you get behind the drivers wheel again think about what you are doing, The display of stupidity that you put on tonight from the Salisbury Hwy to Past the Hospital in Elizabeth was completely retarded!

Not only do you have an exhaust that you could no doubt hear from km away you decided to become a race car driver and weave in and out of traffic, AND you decided to attempt to drift it while doing this. PLUS you were doing stupid speeds and overtaking cars where it was clearly not safe to do so, then to top it all off, going past a hospital you see people on the side of the road so you show off and "hang it sideways"!! Did you even see the 2 or 3 children on the next corner? They could have stepped out? But no that didnt stop you, you continued to speed, i mean you must have been doing more than 100 in a 50zone to disappear into the distance. Grow some brains mate, its not just you on the road, and because you choose to do this in a skyline you affect us enthusists as well, we do the right thing and dont attract attention, but because of idiots like you we all get labeled HOONS!

If anyone knows this tossa, knock some sense into him!

I also noticed that you have the car for sale..... good luck i say!

Hope you have fun when the Police come knocking at your door soon!

There is a time and a place for stupidity, and its not during heavy traffic and not on public roads!

/end rant

J

Mods if you feel the need to remove, do so, i just wanted to express my frustration!

Link to comment
https://www.sau.com.au/forums/topic/208180-attn-black-r33gtst-owner/
Share on other sites
SLED Grand Master

SLED

Posted
Posted
Directed at the driver of Black R33 GTST Rego SKR-033

Mods if you feel the need to remove, do so, i just wanted to express my frustration!

Congratulations for giving police more ammo against us.

Pretty soon none of us will be driving skylines.

Don't remove this mods......'name and shame' is probably the only way to teach this clown.

benny_blanco Proficient

benny_blanco

Posted
Posted

I agree shame the fool,

Its dickheads like that why Import owners get pulled over and harassed / defected and pay high insurance.

Fair enough If he wants to have some fun, but atleast he could choose a more appropriate location / time to do it when he isn't putting others at risk.

I hope with skylines getting cheaper and cheaper they dont end up like old commonwhores and the reputation they have with dickhead drivers :thumbsup:

andz Mentor

andz

Posted
Posted
maybe we should all give the guy a few prank calls :D

i thought of that as well when i saw the carsale ad

Name David

Suburb Hillbank

State South Australia

Post Code 5112

Mobile Phone 0404872462

feel free to call David anytime after midnight if u cant sleep, wake him up with you

Import S13 Veteran

Import S13

Posted
Posted
good god, the story gets worse... its Auto :(

... No dis-respect to anyone on SAU who has an auto skyline :(

*kicks benny_blanco in the balls*

AAAAUUUTTTTOOOOO!!!!!!

from someone who went from manual to auto, its alot easier to drink and eat while driving haha

oh, and to you SKR033--------- :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...