Jump to content
SAU Community

Recommended Posts

Hi all. I have put up with this problem for some time now, and its time to fix it. When I put the drivers window up (must go right up), the passenger door locks, which is quite embarassing/frustrating, and nearly causing a break up. lol.

Other wise the electrics seem to be fine, other than the key switch which doesn't beep if the key is left in. I dont think they are related.

Has any one has this problem? Any common things to be looking for?

Edited by MYRB30

I've looked high and low and cant find anything out of the ordinary.

BUT, the workshop manual is confusing the hell out of me. My door lock timer (driver side kick panel) has only five wires. The workshop manual has 6 wires for the timer on page 780, and then 7 wires on page 788!!!!

Any help at all is most appreciated.

Thanks matt

  • 2 weeks later...

Hey mate haven't ever played with anything like you're describing, I'd check where you're getting the power for your passenger side door lock. you've obviously got power getting there when it shouldn't its just a matter of finding out how. Why does it only happen when you put the window all the way up and not whenever you try to wind the window up a little, hard to say without seeing the cat but best of luck, hopefully its something simple, keep us posted.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...