Jump to content
SAU Community

Recommended Posts

This is a far off thing but im just interested in how my car would run with a twin setup, its a 2.2litre rb20 Redtop NICS. Its currently running a apexi ax53b70 which can also b used in a twin setup, if i was to put another of the same turbo on the engine wot would the end result be? its a 2.2 so its got abit more to give the turbos but i also heard that the nics has a 12port heard so its got better flow...? if any1 has got anything productive to add id like to hear it... im currently looking into a gt3037s but i dno a twin rb20 would b kool if it actualy worked :P

there is a twin turbo RB20 laurel in SA atm. it came from queensland and was built in japan. It's rb20 with twin gtr turbo's + cams = 230rwkw at 14psi i think...

and the 3037s - do it!!!!

I've got RB24 with a GT3076r - 262rwkw and i've got a set of cams on the way so should be more. (head is standard atm)

:down:

  • 2 weeks later...

there was a twin turbo rb20 on these forums in nsw, its do-able but he ended up getting rid of it. its a lot of lag for a little fun.

your best bet is a single, but if you 'have' to go twins its not impossible, just a lot of custom work

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...