Jump to content
SAU Community

Recommended Posts

Model: '94 Series 1 Skyline R33 GTS-t

Milage: 140,000

Transmission: Manual

Colour: Black

Location: Sunshine Coast, Qld

Complied? Yes

RWC supplied? Yes

Currently registered? Yes. Till Feb '09

Price: $13,500 ono

Contact: Brett 0401353612 or PM me

Comments / Modifications:

This car used to be my daily driver, but I don't get to drive it as much as I would like anymore. It's a very comfortable car to drive and is very economical (I regularly get 500kms to a tank). It's a very clean car and it doesn't stand out so it won't draw the attention of the boys in blue!

When I bought this car it was stock apart from the exhaust. Since then I have added the following:

  • Cooling-Pro 600x300 Front mount intercooler (Installed behind standard front bar for that stealth-look)
    Turbosmart Dual-stage boost controller (switchable between 7psi and 10psi)
    ARC Blow-off Valve
    Pod filter
    17" ANZ Mags + 235/45 Tyres
    Lowered KYB shocks and springs
    Front and rear strut braces
    Hicas lock-bar
    Factory side skirts
    Tinted windows
    Custom Silver Dash
    Isotta steering wheel
    Boost gauge
    Pioneer head unit (was top-of-the-range when I bought it 3 years ago)

I service the car every 5,000kms and in the last 6 months I have also done the following:

  • New heavy-duty EXEDY clutch
    New brake pads and fluid
    2 New tyres
    New battery
    Regassed the Air Conditioning

Images:

post-25920-1204509957_thumb.jpgpost-25920-1204509972_thumb.jpg

post-25920-1204509988_thumb.jpgpost-25920-1204510004_thumb.jpg

post-25920-1204510017_thumb.jpgpost-25920-1204510030_thumb.jpg

post-25920-1204510045_thumb.jpgpost-25920-1204510059_thumb.jpg

post-25920-1204510074_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/208681-black-series-1-r33-gts-t/
Share on other sites

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...