Jump to content
SAU Community

Recommended Posts

with that product do take into account that its designed for different shape licence plates. so the spring tention could be too little.

for rear licence plates ive looked at setting up a air ram or electric solinoid valve for moving that up n down. once ive finished this ill post more. (that could be years knowing me)

My boss told me that you can transmit a certain AM radio frequency that renders a RADAR speed camera (not 3 lines on road) ineffective whilst in range of it. Just a matter of trying it out some how. Older speed cameras that use the 3 lines on the road are not succeptible to such trickery unfortunately.

This technique also works with Porches, by transmitting AM frequencys when your next to a Porche it will shut down its ECU and the driver will have to start the car again. Very effective for drags.

That spray looks pretty good, I had an idea once of putting a high output xenon globe above the number plate that was triggered off by a flash sensitive device...... hopefully in time to blind the camera.

Alternatively you could use solenoids to flip your number plates up and down using a switch inside the car.

So many ideas....... mwaahahahaha ;)

akeenan if you do a good ennuff job of the flippers etc etc then its really going to *** with his head.  

most likely get a sticker, but if the plates couldnt be moved when he tried to move then he would be left really confused.

except for the common fact that police browse these forums and are now aware of these devices i think youd be in a bit of trouble.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...