Jump to content
SAU Community

Suction Camera Mounts Still Ok At Wakey? Found Out: No

sl33py

By sl33py,
in Australian Capital Territory

 Share

Recommended Posts

sl33py Mentor

sl33py

Posted
Posted (edited)

Hopefully someone knows this off the top of their head: I'm about to buy a camera for Wakefield. I've found one for pretty cheap and kinda keen to grab it tonight if someone can confirm for sure if the Wakefield supervisors are OK with (internal) suction mounted cameras? I ask because I heard somewhere they used to allow them and now don't. I'd ring and ask them myself tomorrow, but don't wanna miss this one out.

This is the model I'm looking at: the Motorsports Hero on here http://www.goprocamera.com/

It can mount to a windscreen (front or rear) or any typical racing helmet (but I'd be using it on the windscreen).

EDIT: Found out: No. Also no spectators on pit lane whatsoever, racing or not, signed in or not, paid or not, NO - not allowed.

So 5h1tty @ the new rules.

Edited by sl33py
StinkyPoo Mentor

StinkyPoo

Posted
Posted

Cams rules have changed. If it's a CAMS day and your camera weighs more than 100grams, it need to be in a inclosed frame/box, unless the camera is mounted to the floor (*shrugs about that rule).

If it's not a CAMS day, what ever that other racing body is, you'll have to check their rules.

Michele Veteran

Michele

Posted
Posted
Michele didnt have any dramas at an autosports track day at wakie, so i cant see it being a drama.

I haven't had any probs in the past, however its changed hands and rules have changed. I don't think they'll mind at all and there's a hundred other places to use it. Go for it.

They won't let you stand near the wall at Pit Straight anymore, you can't even cross the road.

W1ngnut Proficient

W1ngnut

Posted
Posted

That's an awesome camera sl33py!!

I've been looking off and on for about a year trying to find a video camera to use at the skidpan and motorkhana's that is also waterproof.

Where can we get one of these in Australia?

Does anyone else have something similar?

sl33py Mentor

sl33py

Posted
  • Author
Posted

I spoke to the manager today. You're not allowed to have any camera on or in your car unless it's bolted down and/or in a cage. No suction mounts. I wish I'll have to ring them before Wednesday and find out if you can actually stand and watch at the barrier. If you can't there's no point going to track unless you're taking part :D

Michele Veteran

Michele

Posted
Posted
What... that was the whole point of going to Wakefield. Nothing dangerous ever happened to my knowledge.

Yeah the best photos were from there, but you can't cross the big white line now :D

sl33py Mentor

sl33py

Posted
  • Author
Posted (edited)

sfrizza: Yeah, I'm particularly impressed by the quality/smoothness of the clips and simplicity/functionality. You can get them on eBay, either locally or from the US. From the US is, I think, about 70-80 less all told. I'm just trying to nail down a suitable headrest mount - am waiting on a reply from a US retailer, who says the GoPro doesn't have a 1/4" bolt hole on the underside like most cameras. Will let you know how it goes.

Edited by sl33py
StinkyPoo Mentor

StinkyPoo

Posted
Posted

I made my own camera mount using existing holes. All out of cheap aluminum from bunnings.

Check out my vids on youtube

http://youtube.com/user/Stinkypoopoo

The lastest video is from Gokarting, where it was mounted on my helmet.

GeeTR Grand Master

GeeTR

Posted
Posted
This is the model I'm looking at: the Motorsports Hero on here http://www.goprocamera.com/

Thats some insanely impressive footage, if its hasn't been touched up :P

Color sat, light change sensitivity and shock resistance is outa control for the price! *checks bank balance*

sl33py Mentor

sl33py

Posted
  • Author
Posted (edited)

I've just ordered that camera, and the "Cruise Cam" headrest mount. the GoPro doesn't have a 1/4" bolt hole like most cameras, so I'm hoping to use the very high bond tape to attach it to the mount (hopefully in a removable way that will let me use the other mounts when not on the track). Will let you guys know how it goes. Cost a little over 300aud delivered, so if it works well... !

BTW, just confirmed something else: Noone is allowed to stand on pitwall whatsoever now. Paid, unpaid, signed in or not. Not allowed. GHEY.

Edited by sl33py
sl33py Mentor

sl33py

Posted
  • Author
Posted (edited)

Err Keith, the fact that the whole group I know who went last week were forced by Wakefield staff to go up and stand/sit near the first corner instead of standing on pitwall, even though they were all paid up and registered drivers on the day, would suggest otherwise. And that was a speed off the streets day, not a track day. AND I rang and asked Adam Ronke to ask and confirm, because I didn't want to go if I couldn't even see what was happening. So no lies here.

Edited by sl33py

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...