Jump to content
SAU Community

Recommended Posts

Hey guys and girls got a few things lying around thought I might get rid of

Front Mount Intercooler with piping - $120

including all pipes, various rubber connectors and clamps. Front mount has usual markings from use still in decent condition...pipes could do with a clean...Put stock cooler back on my car SOLD

Stock J Pipe (from throttle body) - $10

Gutted Cat Converter - $10

Either HKS or GReddy copy (i think) BOV - $30

R32 GTR Inlet Manifold - $50

Has had black paint removed, ready for painting, no weird markings etc good condition

Stock R33 Series II Injectors - $75

Unknown condition, came spare with my old car

Stock R33 Series II ECU - $75

Also unknown condition, came spare

R33 GTR Copy Wing - $110

Had on my gtst but removed as put stock wing back one...brake light wire clip broken off for some reason, pushed wires into clip to use...all LEDS working when removed.

R33 GTST Stock Dump pipe - $15

came with stock turbo i bought

Located in Burpengary North Brissy...Pickup Only, can get more pics of items if required

Im also after a stock r33 catback exhaust if anyone has one

pm me for more info

Thanks

post-36458-1204791648_thumb.jpg post-36458-1204791657_thumb.jpg post-36458-1204791670_thumb.jpg post-36458-1204791683_thumb.jpg post-36458-1204791694_thumb.jpg post-36458-1204791705_thumb.jpg post-36458-1204791717_thumb.jpg post-36458-1204791735_thumb.jpg post-36458-1204791755_thumb.jpg

Edited by elad_33
Link to comment
https://www.sau.com.au/forums/topic/209237-r32-r33-stuff/
Share on other sites

Hey guys and girls got a few things lying around thought I might get rid of

Front Mount Intercooler with piping - $120

including all pipes, various rubber connectors and clamps. Front mount has usual markings from use still in decent condition...pipes could do with a clean...Put stock cooler back on my car

Stock J Pipe (from throttle body) - $10

Gutted Cat Converter - $10

Either HKS or GReddy copy (i think) BOV - $30

R32 GTR Inlet Manifold - $50

Has had black paint removed, ready for painting, no weird markings etc good condition

Stock R33 Series II Injectors - $75

Unknown condition, came spare with my old car

Stock R33 Series II ECU - $75

Also unknown condition, came spare

R33 GTR Copy Wing - $110

Had on my gtst but removed as put stock wing back one...brake light wire clip broken off for some reason, pushed wires into clip to use...all LEDS working when removed.

R33 GTST Stock Dump pipe - $15

came with stock turbo i bought

Located in Burpengary North Brissy...Pickup Only, can get more pics of items if required

Im also after a stock r33 catback exhaust if anyone has one

pm me for more info

Thanks

post-36458-1204791648_thumb.jpg post-36458-1204791657_thumb.jpg post-36458-1204791670_thumb.jpg post-36458-1204791683_thumb.jpg post-36458-1204791694_thumb.jpg post-36458-1204791705_thumb.jpg post-36458-1204791717_thumb.jpg post-36458-1204791735_thumb.jpg post-36458-1204791755_thumb.jpg

i will take intercooler kit will it fit r33 gtst where is Burpengary pm'ed

Edited by CHUCKIE821
Link to comment
https://www.sau.com.au/forums/topic/209237-r32-r33-stuff/#findComment-3700102
Share on other sites



  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
×
×
  • Create New...