Jump to content
SAU Community

R32 Gts-t Standard Airbox

[mez]

By [mez],
in Classifieds

 Share

Recommended Posts

[mez] Community Regular

[mez]

Posted
Posted

R32 GTS-t Standard Airbox with used HKS panel filter

Condition and Additional Info: Airbox is in fair condition, comes with used HKS panel filter (probably needs a good clean as it's been sitting around for a while). No mounting bolts included with airbox.

Pictures:

image003xn6.jpg

image004sf2.jpg

image002na2.jpg

Reason For Sale: No longer needed.

Contact Details: PM or SMS or Phone: 0411 842 861

Price and Payment Conditions: $50.

Location: Brisbane (southside).

Delivery & Conditions of Delivery: Pick up. Will Post at Buyer's Expense.

Link to comment
https://www.sau.com.au/forums/topic/209426-r32-gts-t-standard-airbox/
Share on other sites
  • 2 weeks later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Jarsky
      R34 Speedo not working after manual swap

      By Jarsky · Posted

      Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia body...
    • Jarsky
      After market rear camber arm adjustment

      By Jarsky · Posted

      This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • Rezz
      Spotted on the street....

      By Rezz · Posted

      A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
×
×
  • Create New...