Jump to content
SAU Community

Recommended Posts

What are all specs of the bike?

Suzuki GSX1300 R Turbo 2000 model

What turbo (Specs of both wheels and wastegate)? Motor internals, is it still high comp with standard pistons or is it forged?

Runs a garret t28 same as found on the Nissan Silvia

What cams, crank rods, etc?

Stock cams stock crank and stock rods

Extended swingarm?

I have one 4 inches over for it but not on the bike will get sold separately

What boost, I see you state it is running 8psi? Is it laggy?

It runs off 4lb wastegate spring and off a boost controller it has 4 lb boost in 1st gear 6 lb

boost in 2nd gear and 8 lbs boost in 4th 5th and 6th gears. Laggy I don't think so

What exhaust, just a dumpy style off the turbo with no muffler?

It runs a full system with muffler I tried my best to make it a sleeper

What air filter?

K&N

Injectors standard?

Yes good for 300 HP

What tune has been done to the bike?

Dyno tune as the dyno chart states

and lastly what brake pads, discs etc and why was the colour changed, due to a drop? How does it cope with chains sprockets due to such high hp?

It has race pad and braided lines all round duals on front single rear line and also a braided clutch line

Colour change was due to the fact I bought a red black roller and was going to do a drag bike with it but decided against the whole dragging notion I always liked the red/black scheme so I did a fairing swap and sold the blue / silver roller hence why the colour scheme is a 99 model and the frame is a 2000 model To my knowledge the bike hasn't been on the ground

How many kms on the frame/suspension/motor? condition?

31*** ks at the moment motor is great like I said I had just pulled it apart and rebuilt the top end

Is the frame straight?

As straight as it came out of the factory

The bits you didn't ask for when you turbo a Busa the stock motor will be good for 320 RWHP after that the pistons and rods will start to go after around 400 RWHP time for a new crank. This runs a safe 250RWHP on a decompressed engine. The reason I had to rebuild was due to my own laziness and not retensioning the head when I bolted the turbo on .I believe the head gasket went on it at the first Dyno session when it was getting mapped and it still made its 250RWHP Then when you ad a turbo you must add strong clutch springs to hand on otherwise it just slips once you do that you need to strengthen the sprocket cover so the clutch push rod doesn't blow it out I have put a billet sprocket cover on it and it also works as a case protector. I have also put a brand new OEM clutch pack in it at a cost of $450 and it has never been down the ¼ with this clutch pack. The tyres are going ok but I think that's to me being a soft cock and not flogging it all the time The chain and sprockets are all good but will wear quicker than if it was stock powered

The blow off valve I have put into the ram air tube so it isn't visible from the outside it runs an intercooler under the tank which is probably good for 10rwhp over a stock plenum

I put decent Auto meter Pro Comp Gauges in it for the boost and fuel pressure

It uses a rising rate FMU for the fuel and a Bosch 040 fuel pump only 12 months old, as is the Fuel filter

The bike rides like a stock bike but when you hit the throttle you know it aint stock it has a PC11 and the frame and swing arm are polished

That is all I have for now cheers.

if you need to know anything else just ask I have nothing to hide

click this link for the turbo install pics if you like Install pics

oh and a pic of both bikes is in that link just to prove what i was saying isnt bullshit about having the second busa

how about sending me some decent pics and some more info on your car so we can compare apples with apples

Edited by Xhiler8r
  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

fat bike i want my license bak.

i would trade my 32 straight away but no license.

other then that mate CONGRATS on the best busa i have ever seen.

GL with it and hope u dont get more tyre kickers

thanks for the comments and i doubt that the tyre kickers is gonna ease anytime soon

I thought this would be sold by now, someones going to end up with a good deal.

I am amazed it hasnt sold yet I have had a lot of tyre kicking tossers asking questions and saying that they wanted to swap and organising swap dates and then nothing they wont even answer emails or PM's or even phones

I cant work out why it is so hard for the people that appraoched me for swaps to just ring up and say dude i have changed my mind sorry ok, I am a chicken shit and a turbo Busa just scares the crap out of me, instead of acting like 10yrs school boys that havent had their balls drop yet and too gutless to contact you ( You guys on this board know who i am refering too i dont need to mention names )

anyway getting a roady in about 2 hours time for it so it will be sold with a RWC and registration to QLDers only

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...