Jump to content
SAU Community

Recommended Posts

Hey people - ill let you do the deciding.......

Here are my mods (yes this is a repost, but different subject altogether)....please keep this thread mods:)

R33 gtr rb26dett motor in r33 gtr - Stock internals (as far as im aware)

R34 N1 turbos

Bosch 044 Fuel Pump

Nismo 550cc injectors

3" Exhaust into Aftermarket Dump Pipes

Arc Induction Panel and Arc Box

Stock Intercooler

Stock Headgasket

Apexi Powerfc and Hand Controller

I advised a very highly recommended tuner of my car and mods etc....and said i want a very safe reliable tune, and wanted to know how much power i could make reliably.....

There answer - a safe/reliable 350kw at the wheels, now i was thinking more around the 300kw at the wheels safe power goal....this extra 50kw at the wheels has made me hesitant to go there now, as i think its a bit much on a stock motor?

What do you guys think of this? go to another tuner???

From my readings and with my mods on a stock motor, i was told ~300-320 is a very acheivable figure safely...with stock internals...

Thanks in advice...

His dyno may be "happy" and read high. Its only a figure, see how it drives.

The seat of the pants is the best dyno, spend the money if it pulls harder than it was money well spent :)

Mate we have been over this time and time again.

300rwkw stock internals - is OK, plenty doing it.

350rwkw stock internals - is borrowed time generally.

I dont see how this is any different to the half a dozen other threads

I think i'll keep at 300rwkw, and get use to the power, than go for more after in the future when i have more $$$, and a built motor....

My goal is response, which is key for me, will 300rwkw be plenty enough for a Street Gtr, thats close to 500hp is it not?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...