Jump to content
SAU Community

Getting Car Tuned Finally, Bit Sceptical On Power Delivery Goal

nsta

By nsta,
in Engines & Forced Induction

 Share

Recommended Posts

nsta Mentor

nsta

Posted
Posted

Hey people - ill let you do the deciding.......

Here are my mods (yes this is a repost, but different subject altogether)....please keep this thread mods:)

R33 gtr rb26dett motor in r33 gtr - Stock internals (as far as im aware)

R34 N1 turbos

Bosch 044 Fuel Pump

Nismo 550cc injectors

3" Exhaust into Aftermarket Dump Pipes

Arc Induction Panel and Arc Box

Stock Intercooler

Stock Headgasket

Apexi Powerfc and Hand Controller

I advised a very highly recommended tuner of my car and mods etc....and said i want a very safe reliable tune, and wanted to know how much power i could make reliably.....

There answer - a safe/reliable 350kw at the wheels, now i was thinking more around the 300kw at the wheels safe power goal....this extra 50kw at the wheels has made me hesitant to go there now, as i think its a bit much on a stock motor?

What do you guys think of this? go to another tuner???

From my readings and with my mods on a stock motor, i was told ~300-320 is a very acheivable figure safely...with stock internals...

Thanks in advice...

RB120WHY Enthusiast

RB120WHY

Posted
Posted

His dyno may be "happy" and read high. Its only a figure, see how it drives.

The seat of the pants is the best dyno, spend the money if it pulls harder than it was money well spent :)

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Mate we have been over this time and time again.

300rwkw stock internals - is OK, plenty doing it.

350rwkw stock internals - is borrowed time generally.

I dont see how this is any different to the half a dozen other threads

nsta Mentor

nsta

Posted
  • Author
Posted

I think i'll keep at 300rwkw, and get use to the power, than go for more after in the future when i have more $$$, and a built motor....

My goal is response, which is key for me, will 300rwkw be plenty enough for a Street Gtr, thats close to 500hp is it not?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...