Jump to content
SAU Community

Gtr Performance Parts Sale! Be Quick

boosted_32
 Share

Recommended Posts

boosted_32 Proficient

boosted_32

Posted
Posted (edited)

Hi guys have some GTR parts for sale, decided not to go ahead with my upgrade and invest my money else where.

Item: Standard GTR oil & water lines with a few other bends and hoses (some of the lines are not in the pic, but I do have all the water and oil lines)

Age: 97 R33 GTR motor

Condition: good

Price: $100 PRICE DROP NOW $70

To Fit: (What car) GTR's

Location: Gold Coast

Contact: PM or 0423771735

Item: Standard 97 model GTR manifolds + heat shields

Age: 97 R33 GTR motor

Condition: good

Price: $60 for the pair

To Fit: (What car) GTR's

Location: Gold Coast

Contact: PM or 0423771735

Item: 2 x APEXI POWER INTAKE PODS PART NO: 500 A022 (these pods bolt direct to the rb20/25det afms will fit R32,R33,R34)

Age: BRAND NEW

Condition: mint

Price: $100ea PRICE DROP NOW $80ea

To Fit: NISSAN SKYLINE R32,R33,R34 RB20/25T

Location: Gold Coast

Contact: PM or 0423771735

Item: CUSTOM STAINLESS STEEL INDUCTION PIPING FOR RB26DETT 1 x 3inch 90 degree bend, 1 x 3inch 45 degree bend, 2 x 3inch silicon hose, 2 x stainless clamps

Age: BRAND NEW

Condition: mint

Price: $100 for the lot or will seperate PRICE DROP NOW $80

To Fit: wot eva

Location: Gold Coast

Contact: PM or 0423771735

post-17649-1205376757_thumb.jpg

post-17649-1205376779_thumb.jpg

post-17649-1205376872_thumb.jpg

post-17649-1205376892_thumb.jpg

Edited by boosted_32
Link to comment
https://www.sau.com.au/forums/topic/210190-gtr-performance-parts-sale-be-quick/
Share on other sites
boosted_32 Proficient

boosted_32

Posted
  • Author
Posted
whats the induction piping for, is dat like your cooler piping, please let me know what it replaces as im intersted,

cheers mate

hi mate this piping goes in between your turbo and afm's then the joiners alow u to join the afm's to the pipe and I had purchased the apexi pods that join direct to the afm. the reason I decided to do this is because when you upgrade your afm's on a gtr engine its hard and expensive to find aftermarket induction kits that bolt on to bigger afm's so this was a way of getting around it a bit cheaper, cheers

boosted_32 Proficient

boosted_32

Posted
  • Author
Posted
what car are the pods for

hi mate these pods bolt directly on to the rb20/25det afms, I brought these as I was going to upgrade my afm's before I decided not to do my car up any more

boosted_32 Proficient

boosted_32

Posted
  • Author
Posted
^^ ohh k

so to fit to my GTR i need to upgrade AFM's

rb25det and z32 afms are about 80mm and standard rb26dett afms are about 65mm. if your looking at upgrading your afms to something bigger these would fit perfect but if ur just looking at upgrading filters you could always buy 2 pod adapters and then these would fit your standard afms.

boosted_32 Proficient

boosted_32

Posted
  • Author
Posted
The injectors are direct fit for the RB26? Do i require any changes done to the fuel rail?

Hi mate these injectors are direct fit no modifications needed to the fuel rail at all, the standard gtr injectors have a bosch square plug, these sard injectors take an oval shape plug which are also included with the injectors, so all you would need to do is change your stock injector plugs with the sard ones and then the sard injectors will plug straight in, cheers

boosted_32 Proficient

boosted_32

Posted
  • Author
Posted
Might be interested in the oil and water lines....

But there is only water lines in the pic????

Do u have the oil lines?

hey mate if you look in the other pics of the turbos you will see the other lines I just havent taken them off the turbos yet. Ive got all the oil and water lines, cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...