Jump to content
SAU Community

Recommended Posts

Hi all, i seem to be a having a few issues in all aspects about my new exhaust system....

I have a 3" Split Dump/Front Pipe and 3" Hi Flow Cat with a 3" catback part and 5" cannon output...its annoying me in so many ways....but anyway,

issues aside.....will my stock cat back exhuast connect fine to the aftermarket xforce cat? and this should quieten my exhuast down shouldnt it...its gotta be a better combo than stock dump/front and cat.....?

or would i be better to put the whole stock exhaust system back on?

Link to comment
https://www.sau.com.au/forums/topic/210611-urgent-advice-and-knowledge-needed/
Share on other sites

if you put any portion of your stock system back on, you do realise you will loose power.

ot will be ok to put the stock cat back back on, but it will reduce power and be restrictive.

whats wrong with the system on it? too loud? too ugly??

if you put any portion of your stock system back on, you do realise you will loose power.

ot will be ok to put the stock cat back back on, but it will reduce power and be restrictive.

whats wrong with the system on it? too loud? too ugly??

i highly doubt im gonna lose much power...i have got less power now with the aftermarket system on than i did b4.....go figure! its got everyone stumped.....

but anyway, its too loud for my liking.....and is causing huge fuel consumption issues...and other stuff like that....

Edited by WOG BOY

if you lost power fitting a 3" turbo back exhaust system, then there is another issue there. no way should you loose power. you should gain power, and feel it too. it should be running a few extra pounds of boost too.

you might have a vaccum leak somewhere.

ahh im jus gonna take it off and put the stock cat back on it...leave the split dump and front pipe as well as hi flow cat on it.....

jus gonna make the car more showy.....it probably makes no sense...but i got enought power to beat all the commodore heros round my town...im happy with that!

:)

You definately have another issue. That exhuast should give you a noticable increase in power. Also, if its too loud, that seems strange, unless you like a really quiet car :( The turbo acts almost like a muffler in the exhaust system, so turbo cars with exhaust are fairly quiet compared to NA cars.

Increase in boost level from aftermarket exhaust should lean out the A/F (Air / Fuel) ratio,

which makes the engine produce more power.

I wonder if the stock ECU has switched to the low octane maps that has the retarded

igniton map and richer fuel map. I guess a richer A/F ratio would explain the power drop.

What octane fuel do you use????

It should be at least BP 98 octane.

Have you reset the stock ECU by disconnecting and then reconnecting

the battery????

Edited by SKYPER

i have been using either CALTEX VORTEX 98 or SHELL V-POWER....

no i hadnt done an ecu reset.....should i do that?

is it only jus disconnect the battery then join it back up...or do i have to leave it off for a while?

also the cat that i bought was a 'XFORCE HI FLOW CAT' and i was speaking to the exhaust shop just before and he said that it was a 400square per inch or something....where as his hi flow cats were only 200 square per inch.....so his would be less restrictive.....

what should the measurement be of the high flow cat......? (if any of that last bit made sense....)

Try it and see if there is a difference. It should temporarily clear fault codes, reset ECU to main ignition, fuel maps.

If there is a failed sensor or something else is wrong, it probably will revert back to what ECU was set to before

resetting ECU.

I think you remove the negative first and cover up the negative terminal with a cap. This is to make sure you dont

touch the positive terminal + negative terminal or positive terminal + chassis which is connected to negative terminal.

This could happen when you have a spanner in your hand and get a nasty surprise. Then remove the positive cable.

Reverse this order when reconnecting battery with positive first and negative last

Don't know much about cats, but I would think that a bigger volume cat would flow better.

Edited by SKYPER

alot of people have been telling you that you obviously have an issue that isnt related to your exhaust thats making you loose power and from what you have been saying you have had this issue long before you got the exhaust.

if i were you i'd just take it to a workshop to diagnose it. they will hopefully fix the problem and then you will be glad you had left the aftermarket exhaust on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...