Jump to content
SAU Community

Recommended Posts

hey guys/girls

i got a Beltronics Vector LR that i received of a mate for free as he said it wasn’t working last time he checked. i found a power connection for it and turned it on, and as my mate said, it comes with a error.. it starts of normal and comes up with the normal start up display but after about 5-10 seconds of being on it comes up with . " ?LO1 CAL" i asked some of my friends and one said it may be a calibration error.

Does anyone know what this error is or what " ?LO1 CAL" stands for. also does anyone know whether this problem is fixable and if so an approx. price.

Thanks any help appreciated niran

Link to comment
https://www.sau.com.au/forums/topic/210675-radar-detector/
Share on other sites

hey guys/girls

i got a Beltronics Vector LR that i received of a mate for free as he said it wasn’t working last time he checked. i found a power connection for it and turned it on, and as my mate said, it comes with a error.. it starts of normal and comes up with the normal start up display but after about 5-10 seconds of being on it comes up with . " ?LO1 CAL" i asked some of my friends and one said it may be a calibration error.

Does anyone know what this error is or what " ?LO1 CAL" stands for. also does anyone know whether this problem is fixable and if so an approx. price.

Thanks any help appreciated niran

I found that powering it on from cold it worked fine, if it was in the sun for too long it would start giving me that error. Lucky for me it was still within it's 3 year warranty and I took it to a supplier and repairer and they actually replaced it (and with a newer model), place was called Neltronics in Subi.

Link to comment
https://www.sau.com.au/forums/topic/210675-radar-detector/#findComment-3724498
Share on other sites

hey guys

i rang up neltronics however the number that was on yellow pages, does not work.. If i try ringing, it just says the call could not be connected. the number i dialled was (08) 9388 9950, does anyone else know of another number for this store??

Thank’s

niran

Link to comment
https://www.sau.com.au/forums/topic/210675-radar-detector/#findComment-3725306
Share on other sites

OK.. here's the story...

"LO CAL" (or "MARKERS" or "PLL LCK") is a fault code describing some kind of error has occured during a calibration test. BELTRONICS are keeping their software to themselves to avoid Chinese manufacturers from reverse engineering their products and whacking on the software... smart hey! :)

To repair this issue we would hopefully have a replacement board here in stock... we simply open up your faulty unit... put in the refurbished board... set up the menu and bands and away you go. The faulty board is then shipped to BELTRONICS to be refurbished and reflashed with new software.

The software repair is $95.

In WA cops use:

Multanova (not multinova!!!) which is a Ka band radar signal... low output so hard to detect

Patrol cars which use a K band radar signal... strong power so easy to detect... BUT... remember not every car is equiped and if they are, they might not be turned on

Sgt Plod himself uses a hand held laser signal... very strong, very fast, very accurate, VERY NARROW so damn hard to detect unless its fired right at your detector at which point they probably have you anyway.

That concludes todays lesson kiddies... now you can all go home, except Ossie... come here for a touching!

Link to comment
https://www.sau.com.au/forums/topic/210675-radar-detector/#findComment-3726617
Share on other sites

$95 to repair? What about warranty ;)
i got a Beltronics Vector LR that i received of a mate for free as he said it wasn’t working last time he checked.

Need I say more!!!

Plus the fact that a Vector LR came out around 9-10 years ago with a 1 year warranty.

Pulp, what unit do you have?

Link to comment
https://www.sau.com.au/forums/topic/210675-radar-detector/#findComment-3727163
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Have you flushed the initial fluid yet? It should look like a rainbow unicorn shat glitter into it. 2nd or 3rd fluid change is when you party.
    • all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
×
×
  • Create New...