Jump to content
SAU Community

Recommended Posts

Firstly this is my very first post, I'm glad to be a member and I'm certain that I will learm a lot from this forum.

I've found an R33 GTS that i really like and would love it as a first car, from what I have read so far, some of you approve of them as first cars, some disapprove for various reasons. Anyway, I'm going to go and have a look at it, and I was just wondering what I should be looking out for.

Do the R33s have any particular rust spots or any common problems that I could look out for?

Any help would be greatly appreciated, thanks.

Link to comment
https://www.sau.com.au/forums/topic/210740-1993-r33-gts-any-problemsissues/
Share on other sites

Thanks! I think was probably just about everything I need to know, I'll definately keep all of that in mind.

Yeah I wish I had found that before I bought mine (R33 GTS). Might've seen a few things that cost me later on!

As for the R33 GTS as a first car... mine was my second but I'd certainly say it's a pretty good way to introduce yourself to a car with a *little* bit of power... I went from an old Sigma with like 3rwkw (maybe not... but pretty woeful) to my R33 GTS and I must say that for at least the first year that was plenty of power for me. It's not about having a super-quick car, but I'd always wanted an R33 and it's a whole lotta fun to drive, handles fantastic (esp. compared to the majority of 'daily-drivers' that are in the price range of a first-car buyer... and certainly better than any falcodore of the same year!), and goes well enough to not be boring. Oh, and of course it was a major cop magnet :P Gotta deal with that! Those red "[P]lease Pull Me Over" plates really sucked!

Yeah I'm really hopin that I get it. It will be a nice and fun car i think, I learnt to drive in a Lancer which had about 4 kw as well haha so it should be a nice change. It's all standard though and I'm not planning on driving like a complete wanker so hopefully the police men will be nice to me...

umm

im alspo a p plater in a skyline

it doesnt matter how you drive

you will get pulled up

about once a week

once a fortnight if your lucky

they will pick you out at every single booze buss

and they will glare you down as you drive past them

welcome to the import world :down:

If you are allowed to drive a turbo where you live then buy one, they are around the same price as the NA's now. If you're not allowed to drive them buy a crap box until you are. Dont waste your time with NA lines.

ok i know i might just be a lucky mofo but at the time of writing this post i have NEVER been pulled over in my gts-t. Im 21 and come off my P's tomorrow (yay!) and ive had this car since November last year. Not a single problem yet and i run what im sure is an illegal exhaust and FMC.

i guess that someone up there wants me to have fun in the black beast with no cop trouble :D

PS i call my car the black beast for those who dont know :D:D:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...