Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Could be a good thing, as all you do is find a registered inspection place and they do the paperwork

Like in vic, when I got a car registered at an isnpection station all they do is stamp the paper work, the inspection place checks compliance/legality, issues a roadworthy cert and all is good:D

Here's hoping its part of the govt cutbacks, so they dont need to employ a heap of people at regency. How good would that be.

Hippy in NSW if a car is over xx (cant remeber) years old, it must be inspected and a certificate of roadworthiness issued. The upside is that there is no way in hell that poor old regency would be able to handle these sorts of numbers of vehicles, therefore it would be outsourced - by by regency...hehehe

Originally posted by hippy

yeah but what about the outsourced company?? they could have pricks there .. although unlikely since it will be performanced based??  so they're likely to let shitbombs pass..

If they are pricks, no one will go there - reputations carry far and wide.

I found that most places in vic were actually really good (those places that were absolute sticklers, everyone knew about and no one went there), didnt worry too much if the car was a little low, or exhaust a bit noisey, minor bending of the rules as long as it wasnt bodgey back yard stuff.

In NSW authorised garages/workshops carry out the yearly rego inspections. There are literally hundreds of these authorised workshops, & they're all privately owned. In other words places like RPM Performance Centre, Tilbrook Auto Dyno & the like :) Some workshops will pass anything, whereas others are known to be very tough. It’s very simple, if you don't get the result you’re after (a pass) then you go elsewhere. Unless your car has major faults you WILL find someone to pass it! Been there done that :)

The authorised inspection workshops in the NSW system can lose their licence if they are linked to an unroadworthy car (ie it gets defected due to a major safety fault). This ensures that they don't just pass anything. It doesn’t stop many authorised workshops from doing extremely relaxed inspections. I’ve had places do a brake test on my car (the inspection requires a brake test print out) & they haven’t even started my car! The bottom line is… what the owner does to his/her car immediately after it leaves the workshop is out of the workshop’s control. So as long as the basics are ok you’ll be fine.

I very much doubt the SA Government has the funds to increase staff at Regency to cope will yearly inspections. Hence it will be contracted out in the same fashion as NSW & VIC etc. They is no way in hell one single workshop will be able to cope with all cars that fall within the inspection criteria.

The people that will have trouble with a yearly inspection system are those with shitbox cars rusting to pieces & blowing huge amounts of smoke & the like. These kinds of faults can’t be removed & re-installed if you get my drift – no pun intended :D

Steve,

In NSW all cars over 2yrs old are subject to yearly rego inspections. In my 15yrs in NSW I never had a car fail a yearly inspection. It sometimes took a second workshop but I still never failed :D

Dont raise your hopes up ppl!!!

Anything that the government touches or involves in will only make our lives more miserable and EXPENSIVE.

So instead of spending our good dough on mods and getting it done right, we will in the future

1. Waste our times at car inspection place....the line may be very long if everyone need to get it done.

2. pay fees every year or so...I bet GST still applies here :P

3. Expose our cars to a the public regularly......it would be a good place for car thieves to hang around don't you think :D:(

4. The cops still be able to defect your cars on the roads....Regency will still be Regency as usual!!!

I don't know what's so good about this except more revenue for the government.

It will only get from bad to worst :(

No my cup is quite full at the moment.

Life could not be any better so far :)

The politicians and politic in Australia are rediculous.

May be they should impose a rule and do a yearly IQ/health/usefulness check on the politicians and see how many get written off per year.

That I like to see :P

Thats the funny thing, you could be the biggest fark head in the world and get voted in to politics, no intelligence/education required, just a personallity that people will vote for!

Scary stuff, but I still prefer to look on the upside to the rego inspection things, rather than focus on the bad...lol

Bottom line? which would you prefer:

all those shit boxes that drive around on the street, potential accidents waiting to plow into your car, or worse still you or your family left in peace while the drivers of nice cars get defected all the time for bullshit like 'I think your car is not legal ride height, so you better get down to regency'

OR

those shitboxes removed from the street AND you get to have your vehicle inspected by the workshop that you have been forking out your hard earned mod dollars (like in Vic)

Why not ask Miss Nismo who she would have preferred to have the vehicle inspected by when she changed the rego to SA in her R32, or one of the many guys who were defected with imports?

and lastly,

would you bitch if as you were driving home from getting defected, you pulled up at the lights next to some rust bucket spewing smoke and bouncing all over the place because the suspension is so rooted, yet they drive around all day evey day with out a care in the world?

All I am saying is, look at the big picture. Bottom line, I would be happy to pay a few dollars to have my car inspected if I knew that dangerous pieces of junk were being removed. With any luck their will be better spinoffs (easier vehicle inspections for rego transfer/defect) as well.

Either way, neither you nor I will change it, but I think it aint all bad, you choose to think it is. I hope your wrong:p

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...