Jump to content
SAU Community

Identify These Side Skirts!

Zilch*

By Zilch*,
in Exterior & Interior Styling

 Share

Recommended Posts

Zilch* Mentor

Zilch*

Posted
  • Author
Posted (edited)

Something a little different, I'm going for a very mean look. It's a black R33, it'll have GTR rear guards, topstage vented front fenders(so wider profile), GTR series 2 or 3 front bar,GTR grille, trial rear bar, carbon fibre stealth wing, light gold koya driftek rims with spacers so they don't get swallowed up by the guards. Oh and I have a GTS badge(red S) to go on there as well(GTR style but not pretending)

I think cos the edge side skirts go out slightly in design that they'll complement the wider profile that the car will have, they aren't over the top and should tie in nicely with the vented guards. Also will be getting a carbon fibre bonnet and ganador mirrors to complete the mean look to it, bonnet is so far looking like being the top secret one or similar simple vented one.

What do you think?

Once again, cheers for the help :cheers:

Edited by Zilch*
mr. kirisaki Community Regular

mr. kirisaki

Posted
Posted

Well, personally I don't like that little pointy thing sticking out at the front of the skirt? I reckon 400rs, they look tough :/ But that combo you have there is sick, so whatever you choose should be fine... as long as no Veilside items are involved lol.

Travis32 Proficient

Travis32

Posted
Posted
Hey guys can anyone tell me what these side skirts are? I thought they were Jun but apparently not.

Also, would anyone know where would actually sell these?

post-35130-1205820467_thumb.jpg

gday mate i aint sure what skirts they are but if ur interested in someone who knows who the are.Gice JS auto imports a yell cos he can find out n supply them 4 you.He is a trader on here but i think ur better to talk to him directly.his web site is www.jsai.com.au/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jarsky
      After market rear camber arm adjustment

      By Jarsky · Posted

      This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • Rezz
      Spotted on the street....

      By Rezz · Posted

      A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Its a well known brand in New Zealand; its a rebrand of the Rhino RAV3.  I don't know what the wiring difference *is* between the rev.1 (installed about 15 years ago) and rev.2; but as you say I would think its reasonable that it uses the same immobiliser relay circuits. I had a look but couldnt see a similar harness; but didnt move things around since I didnt want to mess with it   It was one of AVS well known Authorised Installers; I spoke to AVS themselves about it but theyre unsure hence seeking advice more so from the skyline community who are more familiar with the actual car and its wiring. Im in Auckland; but the installer is on the other side of the city so hes very reluctant to come back to even look at it to confirm something isnt connected into the wrong wire.  I dont want to drop the name since they *did* do a really good job for the most part. Everything is very tidy and he fully replaced all the alarm wiring, all the sensors, the wiring to the door motors, installed a switch which was never installed in the first place...really happy with the alarm install itself..just not this one issue. We all make mistakes, if it is the alarm, I just want my fuel pump getting proper switched, fused, power as it was; without having to shell out for an auto electrician to switch a wire and tell me it was the alarm. 
    • pacman_1219
      Blue/grey smoke after idle

      By pacman_1219 · Posted

      Even with the piston at TDC there was room for it to drop, but I don't think it can drop fully into the cylinder, the problem you have is that you need something pushing against the valve to hold it up so you have enough room to put the new stem seal on and the spring etc.  I used compressed air only because putting rope in the cylinder seemed a bit risky to me, I know people have done it countless times before like this. Overall it's a pain in the ass job. Honestly you'd probably be better off taking the head off because the risk of dropping something in the engine and the finicky-ness of it all is very stressful. If you are going to attempt it though i 10000% recommend a 36050 valve spring/keeper tool. I had both the traditional lever type and after doing 1 cylinder it was absolute pain to get those valve keepers in place, even with 2 people. That 36050 is amazing, you do have to push hard to get them in place but it works perfectly almost every time. Back to my actual issue I think my engine is just tired and old and the rings have gone bad. The comp numbers (cold, no oil) were: Cyl 1 -129psi Cyl 2 - 133psi Cyl 3 - 138psi Cyl 4 - 137psi Cyl 5 - 157psi Cyl 6 - 142psi   Cylinder 5 and 6 having the most carbon on them.
    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
×
×
  • Create New...