Jump to content
SAU Community

Recommended Posts

Something a little different, I'm going for a very mean look. It's a black R33, it'll have GTR rear guards, topstage vented front fenders(so wider profile), GTR series 2 or 3 front bar,GTR grille, trial rear bar, carbon fibre stealth wing, light gold koya driftek rims with spacers so they don't get swallowed up by the guards. Oh and I have a GTS badge(red S) to go on there as well(GTR style but not pretending)

I think cos the edge side skirts go out slightly in design that they'll complement the wider profile that the car will have, they aren't over the top and should tie in nicely with the vented guards. Also will be getting a carbon fibre bonnet and ganador mirrors to complete the mean look to it, bonnet is so far looking like being the top secret one or similar simple vented one.

What do you think?

Once again, cheers for the help :cheers:

Edited by Zilch*

Well, personally I don't like that little pointy thing sticking out at the front of the skirt? I reckon 400rs, they look tough :/ But that combo you have there is sick, so whatever you choose should be fine... as long as no Veilside items are involved lol.

Hey guys can anyone tell me what these side skirts are? I thought they were Jun but apparently not.

Also, would anyone know where would actually sell these?

post-35130-1205820467_thumb.jpg

gday mate i aint sure what skirts they are but if ur interested in someone who knows who the are.Gice JS auto imports a yell cos he can find out n supply them 4 you.He is a trader on here but i think ur better to talk to him directly.his web site is www.jsai.com.au/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...