Jump to content
SAU Community

Sparco Evo2 L Vs. Cobra Suzuka

Rezlo

By Rezlo,
in Exterior & Interior Styling

 Share

Recommended Posts

Rezlo Community Regular

Rezlo

Posted
Posted

Hey guys, I need to import a seat for my GTS that will be used for track fun days, a bit of solox and some street usage, ive got it down to 2 seats that will be legal for usage in the racing I want to use it in, the sparco evo 2 L or the Cobra Suzuka,

Has any one here used either of these seats for street usage as well as track? the sparco looks to have a slightly more suitable back possition for street but I would like to hear some opinions on using either of these fixed back's on the street, unfortunatly reclining is out of the question as far as the rules go.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/211184-sparco-evo2-l-vs-cobra-suzuka/
Share on other sites
R31 drift pig Experienced

R31 drift pig

Posted
Posted

Wrong. :)

Fixed is NOT illegal.... you can remove your rear seats and have the car engineered/mod plated/certified (depending on what state you're in) as a 2 seater.

If the seat AND rails are ADR approved, you wont have a problem with the 5-0...

that being said, 99% of peoples car's on here would be classed as illegal.

If you want to be super legal, and have a great seat, Get a VELO seat. ADR approved, AND FIA approved. So will pass every level of scrutineering I beleve. Cheaper then the spacros/cobra's as well. They have a really nice driving position, are light, and can basically be custom made to your needs....

NA_Goodness Grand Master

NA_Goodness

Posted
Posted

I stand corrected than!! I was told they were. Oh well, thanks for correcting me, and not yelling your head off at me like other people on here...

BTW, they can find something wrong with everycar. Someone did a test on a bunch of cars straight out of the yard and every one failed for little things :). The laws are bullshit!!

Rezlo Community Regular

Rezlo

Posted
  • Author
Posted

Problem is that im in South Africa, getting seats shipped is MEGA expencive, for me the street legal part isnt a problem, as long as its legal on the track, but yeah i use my car often so i need somthing thats not to 90deg

Guess ill have to fly up and go try a few seats...

R31 drift pig Experienced

R31 drift pig

Posted
Posted
I stand corrected than!! I was told they were. Oh well, thanks for correcting me, and not yelling your head off at me like other people on here...

BTW, they can find something wrong with everycar. Someone did a test on a bunch of cars straight out of the yard and every one failed for little things ;) . The laws are bullshit!!

Tis cool..... people need to have the correct info.... As for what you said, a friend of mine purchased a brand new VZ commodore SS ute for work, had it for 2 days (car wasnt touched in this time at all), and got pulled over with a bit of stuff in the back and got defected for being too low.

And they wont tell you that most police cars are defectable, as the tyres the have arent load rated for all the gear they carry in the boot, plus a few other things LOL.... (Great having a relative in the force :):):D )

Problem is that im in South Africa, getting seats shipped is MEGA expencive, for me the street legal part isnt a problem, as long as its legal on the track, but yeah i use my car often so i need somthing thats not to 90deg

Guess ill have to fly up and go try a few seats...

Well, VELO are made here in South Australia, and I dont reckon there'd be a problem getting them sent to you. Although if you need to try a seat before hand, might be a tad hard.... Other thing is, With VELO/Sparco/MOMO/Corba/Bride/Recaro etc, the side mounted seats actually can have the mounting points adjusted so they're not on a 90 degree angle. My seat has the rear set of bolts one hole below the front ones, puts the seat on a bit of an angle. (good for head clearence too)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...