Jump to content
SAU Community

Recommended Posts

hello, just wondering what people think of the potential top speed of my car. i mean, i could get out on the highway and test my theory, but i figured this would be slightly more advisable.

R33 RB25det, pushing 240rwkw (perhaps more)

i havent got an a/m speedo. but theoretically, over 180, you can calculate the speed based on the rpm.

ie: 3000rpm in 5th = 120kmh approx.

so:7000rpm in 5th = 280kmh approx.

i know the car pulls very hard all the way to the redline in other gears, so im assuming it would do the same in 5th. but is 240kw at the wheels enough to make 280?

what do you think? also, is there anywhere in syd where you can do this stuff? im guessing wsid isnt long enough.

Link to comment
https://www.sau.com.au/forums/topic/211223-potential-top-speed/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

As far as i know unless you change your gear/Diff ratios you could have 1000kw and your top speed will be the same as standard, youll just get there quiker :D

also if your running standard computer youll be speed limeted to 180kmh

when i *tested* this speed limeting, it stoped at 5000rpm and was doing about 20km per 1000rpm (if that makes sense)

my guestimate put top speed at about 220km at 7000rpm

i would love to test that also

with a power fc i would say 250 is easy said?

PFC stores top speed for each trip, got mine to 242, but could have gone a bit more (not on public roads obviously)

I recall there was quite a difference between PFC and speedo reading

also if your running standard computer youll be speed limeted to 180kmh

when i *tested* this speed limeting, it stoped at 5000rpm and was doing about 20km per 1000rpm (if that makes sense)

my guestimate put top speed at about 220km at 7000rpm

really? i am absolutely certain there is no limiting on my car, because, well lets just throw it out out there, i have already done at least 230. and that was when i only had 180rwkw.

now im not bragging or indicating that this behaviour is acceptable. im just including it for the sake of this discussion.

i feel the only thing preventing 280 would be wind resistance, ie: not enough power to overcome it.

really? i am absolutely certain there is no limiting on my car, because, well lets just throw it out out there, i have already done at least 230. and that was when i only had 180rwkw.

now im not bragging or indicating that this behaviour is acceptable. im just including it for the sake of this discussion.

i feel the only thing preventing 280 would be wind resistance, ie: not enough power to overcome it.

in that case yes more power would do the trick,

However standard jap computers are electronicly speed limeted to 180...

i belive this to be the case in all jap delivered nissans as my mates 180sx and another mates S14 is the same

unless you have an upgraded ECU i didnt think it was possible to get around it???

unless you have changed the gear box and that is some how changing the speed the ECU thinks you are doing???

i know when i did it (i have since grown out of this sort of behaviour) the speedo read past 180 probly more like 190 but the revs topped out at 5000rpm

more then likely inaccuracy of the speedo as such high speeds

really? i am absolutely certain there is no limiting on my car, because, well lets just throw it out out there, i have already done at least 230. and that was when i only had 180rwkw.

now im not bragging or indicating that this behaviour is acceptable. im just including it for the sake of this discussion.

i feel the only thing preventing 280 would be wind resistance, ie: not enough power to overcome it.

Well I know on mine, I belted through first, second, third, and fourth... about 6000RPM-ish in 4th and it just was like it couldn't go any quicker... The speedo was sayin' a little past the end (180). I'm told this is the limiter. I mean I was accelerating up and up to that point, then it just stopped revving any higher.

Well I know on mine, I belted through first, second, third, and fourth... about 6000RPM-ish in 4th and it just was like it couldn't go any quicker... The speedo was sayin' a little past the end (180). I'm told this is the limiter. I mean I was accelerating up and up to that point, then it just stopped revving any higher.

yeah thats sounds about right, it doesnt bounce or anything like that it just cuts off at 5000rpm

or in your case 6000rpm in 4th

i was on the motor way so didnt really hammer 4th all the way thru

yeah thats sounds about right, it doesnt bounce or anything like that it just cuts off at 5000rpm

or in your case 6000rpm in 4th

Yeah I'm in a N/A... so it's probably something to do with the different diff ratios...

hello, just wondering what people think of the potential top speed of my car. i mean, i could get out on the highway and test my theory, but i figured this would be slightly more advisable.

R33 RB25det, pushing 240rwkw (perhaps more)

i havent got an a/m speedo. but theoretically, over 180, you can calculate the speed based on the rpm.

ie: 3000rpm in 5th = 120kmh approx.

so:7000rpm in 5th = 280kmh approx.

i know the car pulls very hard all the way to the redline in other gears, so im assuming it would do the same in 5th. but is 240kw at the wheels enough to make 280?

what do you think? also, is there anywhere in syd where you can do this stuff? im guessing wsid isnt long enough.

KW does not equal top speed... as stated you could get the same top speed with 100kw it's the gearbox and diff configuration which governs your top speed.

and your 280kmh theory is based upon being able to redline in top gear which is extremely hard to do and would require a massive straight.

KW does not equal top speed... as stated you could get the same top speed with 100kw it's the gearbox and diff configuration which governs your top speed.

and your 280kmh theory is based upon being able to redline in top gear which is extremely hard to do and would require a massive straight.

yes what you have said is true. BUT what i was hoping to learn was whether 240rwkw is enough power to overcome the wind resistance and actually get to 280.

i can guarantee, say, 180 at the wheels, would not be enough to push 280kmh. the wind resistance is enormous at that speed. esp in a skyline with a fmic pushing into the air like sailboat in reverse. therefore the top speed of a 180rwkw R33 might be 240kmh, but a more powerful one...

240rwkw is another story, you can get past 200kmh in no time with that kind of powah! anyone who owns that much donk knows that. but im not going to try it on the road, because at 240kmh you travel a kilometre every 15 seconds... and at 280...well you would be going almost 3 times the speed of any other traffic. and most street tyres arent rated for that. (mine are, but they were $425 each)

so yeh, anyone with any actual knowledge or experience, maybe of driving on an airstrip? that would be cool.

This is such a squid topic :D

I've done 260kph with 110rwhp ...

... on a race track, in a controlled environment, no traffic, ambulance at the ready, on a well prepped and scrutineered machine (motorcycle of course), full protective clothing, and with alot of training and 20 years experience behind me.

Anything less is squid talk.

Edited by RubyRS4
This is such a squid topic :D

I've done 260kph with 110rwhp ...

... on a race track, in a controlled environment, no traffic, ambulance at the ready, on a well prepped and scrutineered machine (motorcycle of course), full protective clothing, and with alot of training and 20 years experience behind me.

Anything less is squid talk.

you make a good point,

however im assuming this topic is theoretical and in the name of sience and plan old interest in the 'what if' style

don't alot more factors come into this than whats been stated?

such as?

i think drag is the biggest one (but i have a gtr wing set at like 0deg lol). maybe mechanical limitations like driveshaft speed?

mate you could have no wind resistance at all and not be able to get to 280kph as it has been stated UNLESS YOU CHANGE GEARBOX AND DIFF RATIOS...........

what are you basing this on? in 5th gear, if the engine is doing 4000rpm at 160kmh, all logic would indicate that at 7000rpm the car will be doing 280kmh. and if you go into the redline, maybe 300kmh (power permitting).

is my speedo or tacho out of whack? im pretty sure in 5th the speeds are approx:

1000rpm - 40kmh

2000rpm - 80kmh

3000rpm - 120kmh

4000rpm - 160kmh

therefore, since its a directly proportional relationship:

5000rpm - 200kmh

6000rpm - 240kmh

7000rpm - 280kmh

im pretty sure my reasoning is correct. and the only thing preventing 280kmh is friction and drag.

hsc physics ftw!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...