Jump to content
SAU Community

Recommended Posts

mickGTR ,i was generalising when i said about the odos .

if u know the car from new all its history then u know how many ks its done but as a rule the imports are turned back take it from me i know they are and u cant check the history cause noone will give u logs . i have an r33 and i got the jap logs cause i bought it from the original owner , he owned it in japan then brought it to aus with the original owners book and logs .

as to u r problem it could be anything but loosing boost shouldn't make it drop to 1000 rpm .

having low compression wouldn't do that either its electrical more than likely .by the way what was u r compression?

it should be 1.18 mpa (165psi ) at 300rpm

I will have to check the com report. I think it's sokmething electrical but it's hard to find because it doesn't do it all the time. Today at the lights I was just idling and then the lights went green i tried to go but the car would not budge! After i turned it on and ofand reved it up a bit it was fine again. Im thinking maybe some sort of fuel prob?

no it doesn't sound like fuel to me if it was fuel u wouldn't be able to go hard like under load at high rpm unles the pump plays up u can check that easy though . when it stalls on u check fuel pressure then before u turn the ignition back on if u have plenty pressure its not the pump.

mickGTR,

I bet its one of the AFM's plug, Same thing happened to my car and it turned out to be a bad connection/wiring on the plug, after I changed the (mine was the top AFM plug) plug and some wiring all was fine. had me baffled too because it wouldn't happen all the time and after stalling and after restarting the engine it would run fine most of the time like nothing happened (this is because cranking the engine would shake the plug enough to get a good connection back)

I found mine by gently wriggling the AFM plugs/wiring and seeing if this affects idle.

I'am only trying to help!

MEGA

Hi again.

I did what you said and played with the leads/wiring while the car was running, and it seemed to do it all the time. I checked the conections best I could but it seemed o.k. The car is playing up more now since i have played with it, so I guess that's what it is. It was the bottom AFM I surpose I will have to replace it now, or can it be fixed. Any suggestions???

MickGTR,

If the plug and wiring seems to be fine, but the problem must be in that area since playing with the wiring made the problem worse (sorry about that) then it must be the Soldered joints inside the AFM have broken and arn't making full contact. After removing the AFM they can be disassembled and resoldered. The square section on the top of the AFM has a rubber seal around it that is glued in place, you will need to run a short sharp blade around the edge then carefully pry the top off the square section, there isn't anything that you can really damage there with the blade but be carefull when prying the lid that you don't break the plastic that surrounds the lid. Once inside you will see a metal box with a brass/copper lid, this box has four terminals on the plug side that can now be resoldered now that the lid has been removed. Seal the lid with some silicon sealant and refit AFM.

I hope this fixes your problem!

MEGA

  • 2 weeks later...

Certain;y is a strange one. I think that u are going to have your work cut out for you on this one. It sounds to me that for some reason the computer is shuting it all down (as when you restart it takes off.

If it was fuel it would die under hard throttle (usually) and for it to come so intermintantly soulds like somthing changes and the computer sensors it. Have youput it on a Dyno to see what air/fuel mix it is running? May be worth a look, at least it will clarify that for you. It does not sound like a simple loose conection as why does it alter when the car is turned off? I doubt the conectipn just fixes itself. I'd say that the comp is backing everything else off.

Mick.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...