Jump to content
SAU Community

Recommended Posts

Hey guys just had a scuff in my s2 33 with a frkn excel cutting the big round about before bunbury.

No headlight damage but left hand fender is pushed in,a little crumpled and the front bar

pushed in a bit under the fender,basically her rear hit 10cm behind light.

There also seems to be a tiny crack on the metal inside under the bonnet.

Should i pay $120-50 for a fender (if i can find a white one) and fit it myself,or get it beaten out and sprayed?

also will i need the inside beaten and resprayed to stop rusting?

How much would all this cost roughly?

I have a bodykit coming on tuesday so front bar is no worries.

Will get pics soon

Link to comment
https://www.sau.com.au/forums/topic/211573-panelbeating/
Share on other sites

Its pretty vague whos fault it actually was,and i was just asking what i should do so i can get some quotes and figure out if its worth bothering her about,shes only had her license 3 weeks and has 3rd party..

im just too much of a nice guy :cool:

lol! if she only got 3rd party that is good news for you as they will fix your car.

if it was her fault and you are going to use insurance then best way is to contact your insurance explain you were in an accident it was the other person fault and they will tell you what to do.

or else just go to different spraypainters/panelbeaters and ask for a quote then give the girl and call and see what you can work out.

depending on the damage to the fender it might just be easier/cheaper to buy a second hand one and get it respray *but it also depends on the condition of the 2nd hand fender*

bonnet best to get it sorted because as you mention if the paint has been crack off and its bare metal it will start to rust. but if its just a crack and on the underside might be easier to bog it up and just spray it black as you wont see it

price its hard to say without pics but maybe anywhere from $250 to $600 ish (ruff est)

Link to comment
https://www.sau.com.au/forums/topic/211573-panelbeating/#findComment-3740687
Share on other sites

touchup the bonnet yourself and get vented front gaurds

anytime something breaks or gets broke upgrade to sumit better

for the other driver issue get two qoutes take to them and ask to pay half totally reasonable and you dont feel like a dick when you spend that money on mods

Link to comment
https://www.sau.com.au/forums/topic/211573-panelbeating/#findComment-3742050
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...