Jump to content
SAU Community

Recommended Posts

This was the original and first Nissan Motorsports Skyline Racecar ever built and was the start of the Skyline Racing History here in Australia.

Campaigned by George Fury and Glen Seton in the 1986 Australian Touring Car Championship and the Endurance Championship. This car won the Manufacturers championship for Nissan in 1986.

Other drivers who raced this car were: John Bowe, Gary Scott and Terry Shiel.

This car has had a full restoration approx. 4 years ago and is mechanically excellent with a very strong Phil Laird engine. There has been extensive development done on the suspension. This car has original airjacks, all the brake callipers and braking system have been fully rebuilt to original condition. It runs a Nissan Works Hollinger 5 speed gearbox with a Nissan Motorsports locked diff, and the original Nissan Motorsports FJ 20 Turbocharged Engine. This car is virtually ready to race and comes with spare diff, body panels, bumper bars and approx. 20 Magnesium Nissan Motorsports racing rims and tyres plus new slicks and new wets.

This is an excellent opportunity to purchase one of Australia's legendary Group A Touring Cars.

This car has a full original logbook with it's original photo's.

This is the very first and original George Fury No. 30.

Can be purchased as is or with full C of D.

Contact Gavin on 0408 566484 or [email protected].

$140,000

can email more photo's if required

post-26996-1206325262_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...