Jump to content
SAU Community

Recommended Posts

yer, it went up - it was publicised a while back.. its to pay for all those shitty roads where you're stuck in traffic each day and all these tollways that are equally crap. Actually its probably the 3rd party insurance costs due to lawyers.. they're doing this country so well.

Its still a crap-load cheaper than QLD though, and NSW

Link to comment
https://www.sau.com.au/forums/topic/21178-new-rego/#findComment-446848
Share on other sites

Well read your notice of registration then, it basically discounts the Registration of the vehicle, which NOW seems to be $157

why say 'dont think so' if you dont actually know?

you are just a post whore ash :P

vic roads website info: [damn its slo today].

Fees Payable for HCC Holders

Registration - nil fee is payable.

Traffic Accident Commission - full fee is payable.

Motor Vehicle Duty - full fee is payable

The Registered Operator of the Vehicle

The registered operator of the vehicle must be either the cardholder or spouse of the cardholder.

If the concession is claimed by a spouse or domestic partner* (irrespective of gender), not shown on the card, the applicant is required to provide a copy of a marriage certificate or a statutory declaration from both parties.

Use of vehicles registered at concession rate

Vehicles registered at the concession rate must only be used for social, domestic or pleasure purposes

Number of Vehicles at Concession Rate

Only one motor vehicle per cardholder can be registered at the concession rate.

Link to comment
https://www.sau.com.au/forums/topic/21178-new-rego/#findComment-446896
Share on other sites

Iwould be surprised if she only PAID $150, that sound more like the DISCOUNT to me, ah wells...whatever

Fees Payable for Pensioner Concession Card Holders

Registration - nil fee payable

Traffic Accident Commission - half of the fee is payable

Motor Vehicle Duty - full fee payable

/arnie voice

TALK TO THE HAAAAND

Link to comment
https://www.sau.com.au/forums/topic/21178-new-rego/#findComment-446908
Share on other sites

Originally posted by aybee

what are you talking about concession?

i used my health care card about two weeks ago and paid around 350.

exactly :D

Originally posted by Al

Funny, i'm having a much more intellectual conversation with you're hand Dale. :P

yeah thanks Al :(

Link to comment
https://www.sau.com.au/forums/topic/21178-new-rego/#findComment-446973
Share on other sites

No its not TAC insurance you get off, here is the breakdown again mate :)

Fees Payable for Health Care Card Holders

Registration - nil fee is payable.

Traffic Accident Commission - full fee is payable.

Motor Vehicle Duty - full fee is payable

it is the reg part you get off which I think it currently $157.

Rego costs vary throughout the state, torquay for example is more like 300 or $400

Link to comment
https://www.sau.com.au/forums/topic/21178-new-rego/#findComment-447253
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...