Jump to content
SAU Community

Recommended Posts

Hey everyone!

im looking into lowering my R34 and i am tossing up between which king springs to get, the "lows" or the "super lows", i did read a few months back about something if you lower an r34 more than xxx cms the tire wear would greatly increase and the handling would be like a bag of potatoes, i have used the search function and couldnt find anything, so yeah anyone know the rough LIMIT that a R34 can be lowered without sacrificing too much handling/tyre wear???

thanx heaps in advance

:thumbsup:

what about coilovers?

Yeah ive thought about coilovers but im kinda restricted budget wise :thumbsup:

but just out of interest would i need to get anything else with coilovers if i did buy them???

im still open for options....itll jus take longer :woot: lol, but simply put im lookn at doin a suspension overhaul as its pretty nasty round corners and bumpy ride, even though ive got the stock rims on it...

lows dont lower it much i have super lows......stock shocks........ i did change the rubber boots and bumps stops to softer ones......it actually rides good doesnt break ur back when u hit bumps as springs are soft........saying that not the best for hard cornering handling and camber wear......but if ur on a budget like i was its good for the low look! last 6 months had no issues.

Edited by rgr34
lows dont lower it much i have super lows......stock shocks........ i did change the rubber boots and bumps stops to softer ones......it actually rides good doesnt break ur back when u hit bumps as springs are soft........saying that not the best for hard cornering handling and camber wear......but if ur on a budget like i was its good for the low look! last 6 months had no issues.

can we get a pic of your car to see what height it sits at with super lows?

lows dont lower it much i have super lows......stock shocks........ i did change the rubber boots and bumps stops to softer ones......it actually rides good doesnt break ur back when u hit bumps as springs are soft........saying that not the best for hard cornering handling and camber wear......but if ur on a budget like i was its good for the low look! last 6 months had no issues.

Cool, yeah i think im gonna go with super lows for now and later get coilovers when i got more money :) , wats it like to live with tho like speed bumps etc, it wont effect my decision much but just wanna know b4 i go get them.....oh and how much did u pay for your super low king springs alone???

yeh as i said the springs rates are not hard so bumps arent a problem.... clears speed bumps too........on bad bumps it will bottom out occassionally but the bumps stops are softer kind of cushion it... i got my done at a workshop paid $470 thats 4 king springs, new boot and bump stops and alignment.......the kings springs to source yourself range from $180 to $200 from what i can remember.....workshop get it cheaper obviously.

Edited by rgr34

Hey all im getting super lows also but what i wanted to know is, Is there anyone that has done this or that will know if there will be enough clearance between guard and tyres?? - My tyres at the rear are 265 on 9.5" wide rims.

I got a price for everything including rolling the guards for $550. Can anyone tell me if cops would stick their fingers in the gaps and give me a yellow? Anyone who was at our cruise friday will know that having coilovers and very handy lol. But right now money points to springs.

Edited by MellowYellow
Can anyone tell me if cops would stick their fingers in the gaps and give me a yellow?

if that was a legal way of measuring, all of those cars where it has body panels that go halfway down the rear wheel would be screwed....just say that if thats how the cop tries to measure your ride height....

if that was a legal way of measuring, all of those cars where it has body panels that go halfway down the rear wheel would be screwed....just say that if thats how the cop tries to measure your ride height....

I watched a cop do it to a large group of us, i think he was checking to see that there was enough gap between tyre and guard not how Low exactly.

im getting super lows just for the rear this week

i shall return with before and after pics if anyone's interested...

yeah im def interested in b4 and after pics

was gonna get mine done this week bt pretty damn bizzy :D

can't wait now :D

You guys must be really young to want to lower your cars that much. Have you checked out any rally cars lately ? they can corner better than most because they don't bottom out around a corner and spit you across the road into an oncoming car. THATS why the police get upset with excessive lowering, especially in the rain. Standard lows or Sydney Kids group buy !! So tell me, how many porches or Ferrari's have adjustable race type coil and shocks ? Only the latest designs have. Why ? Because you can't beat a properly setup shock and coil. Bilsteins & the right valving with coils to match. OK off my soap box.

If you use super lows on stock damper then your asking for more money to be spent in the near future to replace the shock and you will be sacrificing handling.

and also you will need offset camber bushes to correct the front and rear camber if you go that low...

why do it? for looks?

Do it properly use quality dampers with matched springs. Yep it will cost more, but thats what it costs to do it right and have decent handling, skylines are tail happy as it is without ruining the suspension any more...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...