Jump to content
SAU Community

Recommended Posts

okay now I might have to take the idea of the trubo off my mind.. car is fully running like its on 4 cylinders of somethign the whole thing vibrates when idling and sounds like a wrx under acceleration.. guess Ill just have to see what my mechanic says tomoz :D

Update: Mechanic reckons is runnign on 5 maybe 4 cylinders.. he told me to check plugs (i've replaced them), check the fuel return to the furl tank as in might have been blocked and flooding the engine (which I've done runs fine), then he said ignition module (swapped this with my mates made no difference) next up is coil packs, and if not those maybe a blown gasket between the cylinders.. any other suggestions..

Alright I think i've discovered the problem.. I replaced the whole ignition system with that of my mates r33 so I knwo it works fine.. I then proceeded to unplug each coilpack lead one at a time.. as expected the idle changed slightly.. however when I got to the 5th cylinder and unplugged in no change.. im guess this means a problem in cylinder 5..and according to the above problems I'm think maybe a bent valve or valve spring etc.. does that sound possible??

Yes............ Or a crack through the piston ring land.

But unplugging the coil pack on that cylinder still should have made a differance. Maybe the coil pack is faulty or even the loom from the module to the coil pack. Try and swap the loom from your mate's car.

PS: Make sure you have the same series engine (ie: S1 coil packs will not work in S2 engines and vis-versa)

Have you done a compression test yet.

hey guys my turbo i think, makes a noise like this RRREEEEEEEEEE lol, under load, hi revs..

i think its standard 32 but i could be wrong, still ceramic an all..

um and 15psi gets put threw it every day..

goodnight turbo?

fan belt stretchin under load?

how long left till turbo dies?

can i screw the engine if i keep it up?

sorry to hijack...

thanks chris

Yea my turbo makes same noise u mean like a winding noise, its could be the bearings and such when i got my car serviced my mechanic which is benno from racepace called up and said that turbo makeing winding noise and could be on its way, he suggested not to do a dyno because it could blow up then and it could not said should get new one befor i do a dyno, as for how long i dont know i geuss it depends how you drive the skyline and if you use it allot.

Yes............ Or a crack through the piston ring land.

But unplugging the coil pack on that cylinder still should have made a differance. Maybe the coil pack is faulty or even the loom from the module to the coil pack. Try and swap the loom from your mate's car.

PS: Make sure you have the same series engine (ie: S1 coil packs will not work in S2 engines and vis-versa)

Have you done a compression test yet.

Definately nothing in cyclinder 5 and we swapped everything between the two cars.. igntion module, loom, coilpack the lot..I pulled the plugs and plug number 5 had a build up of what looked like oil on it (keeping in mind brand new plugs were fitted yesterday) I also noticed when shining a torch through the plug hole a build up of black sludgy gunk on the top of the head (or whatever ya wanna refer to it as) in both cylinder 4 and 5.. the rest were absolutely clean (i could see bare metal)

Update: Looks like a gasket, between cylinder 4 and 5...umm water coming out the exhaust, umm cylinders missing.. and when you rev it coolant comes out the radiator cap rather than runs away from it.. if that makes sense..

eh and got the compression test shit here so will do one tomoz for confirmation a head gasket doesnt worry me as much as engine damage.. im going to europe for 2motnhs shortly and my bro is a mechanic so he ca do his work while I'm away :D

It defiantly sounds like the common symptoms of a head gasket. My mate just got himself a subaru rs wagon and he has all the same problems as what your having, exept in his case oil has forced its way down his heater hose and is now filling his floor with oil and coolent lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...