Jump to content
SAU Community

Is This Really An Ebc?

BLK33T

By BLK33T,
in Engines & Forced Induction

 Share

Recommended Posts

BLK33T Community Regular

BLK33T

Posted
Posted

Hi all,

I was looking at purchasing one of these however I am second guessing my decision ...

I would like to know if this is just a glorified bleed valve with an electronic bypass ... the way the diagram looks it seems to bypass air through a pneumatic bleed valve once the rocket switch is turned on?

Can anyone verify?? I asked the company selling them but they haven't replied yet...

Clicky

med_gallery_35770_1720_32411.jpg

Link to comment
https://www.sau.com.au/forums/topic/212169-is-this-really-an-ebc/
Share on other sites
BLK33T Community Regular

BLK33T

Posted
  • Author
Posted

yeah that i figured ... but if it is increasing boost by bleeding air off through a PBV then it would just be stock (wastegate setting) and bled off setting ... what I'm concerned about is that it doesn't look like there is any feedback to control the boost pressure...

Jmaac Proficient

Jmaac

Posted
Posted

Its a glorified bleed valve

I believe full EBC's use a stepper motor to get control resolution, they also use much more than a switch for logic. Remember this circuit is DC, the solenoid is only going to have two states from such a switch, open or closed (new boost pressure or back to stock...etc)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...