Jump to content
SAU Community

Recommended Posts

For Sale:

* 4x Enkie RPF1 17x9.5 +18 5 Stud - months old no scratches or anything look brand new. pretty rare never seen them with good offset in australia before. They fit with no spacers on the front with coilovers. Will fit under standard guards with some guard rolling and camber.

Pics on car are with 0 camber rear and 2.5 neg on the front with 30mm guards

These are very light, weigh in at just 7kg's each

Comes with FED 595's on the front only used for a week. And pretty used maxxis tyres on the back

$1800

* 4x Drift Teks 17x9.5 +18 5 Stud 2 of them have been powder coated white and 2 are still bronze. They have a few scratches.

$900

* Sard 550cc Injectors suit SR Been cleaned and new o rings at the start of the year

$350

Work wheels 18x9.5's +2 just a pair freshly painted black

$400

Blitz Nurspec Cat back exhaust

$250

Garrett gt28rs Disco Potato, used for a few months, no shaft play. 0.86 rear housing. with exhaust manifold and split dump pipe. Braided oil feed line, and stock water lines. Has aftermarket oil drain flange from GCG with the line too

$1000

BBS Meshies - 17x8 +35 5 stud offset pair only have driftable tyres on them

$130

Pics:

IMG_0839small.jpg

IMG_0838small.jpg

IMG_0836small.jpg

IMG_0837small.jpg

enkei_rpf1_silver.jpg

Image000-1.jpg

06042008.jpg

0604200w.jpg

Image007-2.jpg

Image006-1.jpg

05042008a.jpg

07042008.jpg

07042008-1.jpg

12042008-1.jpg

12042008.jpg

10042008-1.jpg

10042008.jpg

Location: South Brisbane

Contact: 0401151011 or pm

Edited by Waldo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...