Jump to content
SAU Community

Recommended Posts

hey all,

i finally got my EBC, hooked it all up nicely. but im having some trouble tunning it so im looking for some tips from owners. i have a 33HIflow with the 32 wastegate so 10 psi stock. to set the boost it was to my understanding the % is on what the wastegate is set to.

im after 14psi so its set to 40%, i just cant tweak it right. i get boost fall off and i cant set the gain above 35%??? that normal?

any advice would be awesome!

cheers

Link to comment
https://www.sau.com.au/forums/topic/212678-greddy-profec-b-spec-2-ebc-help/
Share on other sites

have you go the manual for it

if not google Greddy and go to the USA home page, there is a link to "Technical" section and they have EVERY manual for the Greddy/Trust line up

edit: http://www.greddy.com/tech/ ---> full list of manuals

and http://www.greddy.com/img/PHP/products/pdf/682.pdf ---->profec B II manual, look in the last few pages re trouble shooting/basic tips

when setting the EBC up do not worry about getting 14psi etc just aim to get a stable boost curve that is above wastegate pressure, read the manual it tells you how to adjust for boost drop off/boost spike/boost creep, once boost is stable then turn the SET value up to get desired boost

Edited by PT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
×
×
  • Create New...