Jump to content
SAU Community

Recommended Posts

so yesterday i was about to get in my car and head out when i noticed that i had a flat - and i mean REALLY flat, almost on the rim

it was just after 12:00 so like nothing was open (like many things in the glorious SW)

so i rang around and found a guy at a local Ampol that can fix flats at that time of w/e, i get out the compressor,

fill the tyre enough to get going and head downsome bearded man meets me out the front, he says he'll get the wheel off and dip it

to see what the drama is and to leave it with him as he has to finish up on some (hick's) ute he's workin' on

i come back, he tells me it'll be $35 and that he's dipped it and found that it had a large piece of metal buried in it and that he's plugged it.

i look over the tyre to make sure i have all my lug nuts and such. then i go home, park the car and go inside

- retiring the weekend as wasted, although my tyres are good to go.

getting something out of my car today i notice a rattle as i close my drivers door.

the friggin loon has used a two post hoist (i suggest) incorrectly and crunched my skirts!!!

my drivers side worse, but both damaged!

i called and took the car in, but he was closed today.

before i use of swears and ruin my chances of him sorting this out in a civil manner, what leg do i have to stand on?

i feel as though it's not my fault and why should i replace them (or even have them fixed) when i asked for a puncture sorted, not skirts smashed!

any ideas would be greatly appreciated...

did u tell him 2 use that hoist? if u did i do not think there is much u can do because u gave them the go ahead 2 do it!

good luck with it all just remember

that u get more flys with honey than vinegar. in other words do not blow your top at them and try to sort it out with nice words

did u tell him 2 use that hoist?

nah, he mentioned he was just going to jack it up and get the tyre off

i thought nothing of it after that, i didnt even think of how he may have done it until i remember seeing the hoist

Got insurance presumably? Most policies have coverage(no excess) for theft/damage from workshops, might be the go.

you serial? well, i guess i have a backup plan there... hopefully

thanks

dam idiots, i hate when places like this stuff up our pride and joys,

basically act polite and go in there, tell him what has happened and ask him how HE wants to fix it, be firm about what your talking about, talk with confidence but still use politeness if ya get me haha,

if the hick makes up a story and tries to knock your allegations back, take it a step further by going into more formal approaches,

similar thing happened with my mates commodore, went into a workshop to get something done, came out with a big paint chip on the door with what looked like touch up brush paint that was so noticeable, was on the passenger door so my mate didn't see it, he jumped in the car and found it about half a day later :laugh: this place has been known to push people around if you sound soft, go in there be polite but firm and confident and things should hopefully work out, worked for my mate ;)

hope this helps a bit........

sam

That is dodgy. I'm SOOO scared about f**king up someones side skirts. Even with a 2 post hoist you can avoid the side skirts. Like all these guys have said, go back and talk to him about it. Its his fault, so he should fix it.

Legal leg = negligence on his behalf. You paid him, he had a duty of care towards you as his customer - with that comes a certain standard of care that he must uphold. He was in breach of that by screwing up your skirts. So yes to legal leg - try talking to him about it, if it goes nowhere cheaper/easier option for you = insurance claim.

My 2c anyway :yes:

Edited by Nastazia

If you didnt notice the damage at the workshop, I am afraid you havn't a leg to stand on what so ever UNLESS he admits liability.

Bottom line is you have to prove he smashed them, as you didnt notice the damage straight away, he could reasonably argue that the damage wasnt there when you picked up the car.

Best bet, go and see the guy, ask him if he put the car on a hoist or not, if he says he used a hoist, you could point out the damage - he may be a decent guy, and like you, didn't notice the damage straight away, and be willing to fix it.

Good luck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...