Jump to content
SAU Community

Some Hick Grease Monkey Smashed My Skirts!


JP80
 Share

Recommended Posts

so yesterday i was about to get in my car and head out when i noticed that i had a flat - and i mean REALLY flat, almost on the rim

it was just after 12:00 so like nothing was open (like many things in the glorious SW)

so i rang around and found a guy at a local Ampol that can fix flats at that time of w/e, i get out the compressor,

fill the tyre enough to get going and head downsome bearded man meets me out the front, he says he'll get the wheel off and dip it

to see what the drama is and to leave it with him as he has to finish up on some (hick's) ute he's workin' on

i come back, he tells me it'll be $35 and that he's dipped it and found that it had a large piece of metal buried in it and that he's plugged it.

i look over the tyre to make sure i have all my lug nuts and such. then i go home, park the car and go inside

- retiring the weekend as wasted, although my tyres are good to go.

getting something out of my car today i notice a rattle as i close my drivers door.

the friggin loon has used a two post hoist (i suggest) incorrectly and crunched my skirts!!!

my drivers side worse, but both damaged!

i called and took the car in, but he was closed today.

before i use of swears and ruin my chances of him sorting this out in a civil manner, what leg do i have to stand on?

i feel as though it's not my fault and why should i replace them (or even have them fixed) when i asked for a puncture sorted, not skirts smashed!

any ideas would be greatly appreciated...

Link to comment
Share on other sites

did u tell him 2 use that hoist? if u did i do not think there is much u can do because u gave them the go ahead 2 do it!

good luck with it all just remember

that u get more flys with honey than vinegar. in other words do not blow your top at them and try to sort it out with nice words

Link to comment
Share on other sites

did u tell him 2 use that hoist?

nah, he mentioned he was just going to jack it up and get the tyre off

i thought nothing of it after that, i didnt even think of how he may have done it until i remember seeing the hoist

Link to comment
Share on other sites

Got insurance presumably? Most policies have coverage(no excess) for theft/damage from workshops, might be the go.

you serial? well, i guess i have a backup plan there... hopefully

thanks

Link to comment
Share on other sites

dam idiots, i hate when places like this stuff up our pride and joys,

basically act polite and go in there, tell him what has happened and ask him how HE wants to fix it, be firm about what your talking about, talk with confidence but still use politeness if ya get me haha,

if the hick makes up a story and tries to knock your allegations back, take it a step further by going into more formal approaches,

similar thing happened with my mates commodore, went into a workshop to get something done, came out with a big paint chip on the door with what looked like touch up brush paint that was so noticeable, was on the passenger door so my mate didn't see it, he jumped in the car and found it about half a day later :laugh: this place has been known to push people around if you sound soft, go in there be polite but firm and confident and things should hopefully work out, worked for my mate ;)

hope this helps a bit........

sam

Link to comment
Share on other sites

Legal leg = negligence on his behalf. You paid him, he had a duty of care towards you as his customer - with that comes a certain standard of care that he must uphold. He was in breach of that by screwing up your skirts. So yes to legal leg - try talking to him about it, if it goes nowhere cheaper/easier option for you = insurance claim.

My 2c anyway :yes:

Edited by Nastazia
Link to comment
Share on other sites

If you didnt notice the damage at the workshop, I am afraid you havn't a leg to stand on what so ever UNLESS he admits liability.

Bottom line is you have to prove he smashed them, as you didnt notice the damage straight away, he could reasonably argue that the damage wasnt there when you picked up the car.

Best bet, go and see the guy, ask him if he put the car on a hoist or not, if he says he used a hoist, you could point out the damage - he may be a decent guy, and like you, didn't notice the damage straight away, and be willing to fix it.

Good luck

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • 100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • They sell them in Malaysia for about $4
    • First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...