Jump to content
SAU Community

Recommended Posts

hahah im not such a pro either, but the best way to launch IMO is to ride the clutch from about 4k rpm rather than dumping at lower rpm...but then it depends on how early u full throttle after u ride it without wheel spinning.

i'd like to get more advice on launching techniques as well btw... the rims are AVS so it may of helped me with performance abit but the tires are really cheap crap "roadsters"...i was assuming also that the stock rims are light enuff?

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Did you let your tire pressures down?

Like 2.1 for me is a good 60ft but others would say its still abit slow. but for a street car to roll up and get that isnt bad.

Must have a very healthy R34 at least dude, thats a great and very quick time. At the drags I never managed to control my wheelspin. It was always excessive

Granthem, You need a few more mph on the terminal to crack the 13 easy. The mph helps indicate the power you are making so simply put R33Turbo's car makes more power than yours does. When mods are basically the same this can sometimes be due to things like running a Pod filter with no heat sheild.

yeh sorry i didnt mean my car has the MPH to do 13s easy... but i do believe with a good launch i could increase. I know this is against what most people say, but by dropping my 60fts in my old car by .2 of a second i picked up 2-3mph at the end.

So im hoping that a good aunch can net me 98-99mph.

But yes, my pod isnt shielded, i run my standard compliance cat aswell, which i guess is probably the biggest restriction anyway

Edited by Granthem
But yes, my pod isnt shielded, i run my standard compliance cat aswell, which i guess is probably the biggest restriction anyway

i read the stuff about launching, i also try to ride the clutch out. but i get very little wheelspin when launching, even with 240+rwkw. could be the 255 bridgestones on the back lol. going to WSID this wed night hopefully. aiming for high 12s.

also, i would strongly recommend gutting your cat. i did this to my 33 and it revs out so much nicer. must be good for at least 10kw i reckon. and it shoots flames sometimes when you fang it.

search for "gutting cat" or "gutted cat" for some more info. its quite simple to do.

flames FTW!

ill race you if i see you there again. mind you im expecting mid 12s with a 230-240rwkw R33. :D

Interesting - I have similar power yet I'd struggle to run a 13 sec pass!

Good luck :down:

i guess it all comes down to suspension set up and skill!

edit - gt-ahhh - dont get caught with no cat :D

R33turbo - my gtst years ago with standard suspension and with a cat back and pod - I managed a 1.9 60ft.

Last time I ran it was like a 2.2 - I fail!! Mainly cause mines set up for the circuit.

In fact, I want to head out again, would love to see the mph mne gets! f**k the ET :D

lol. I did this once in the hills. Suddenly my car sounded like a ferarri pinging off its head, I realised what I did, but at the same time got a glimpse of the tacho which was reading just past 9000rpm haha. Didn't do any damage at all to my suprise.

Jack

MT ET streets. Drive down on them. Limiter Launch and my commie was pulling 2.0s.

So im considering a set of those for the skyline, because with the different diff ratios and slightly more power i think it would pull under 2 and hopefully, get a high high high 13.

here is my best slip for reference if anyone is interested.

this run i didnt pull 97mph though :blink:

slip.pdf

1.9!? thats so close to the wrx launches. sheesh i guess its possible to get 2.0 then atleast :rofl:

1.9 60' for a rex?

only those who are walking off the line..

my S14 with 175rwkw and 17 inch 255's with 22 psi in them using stock clutch and turbo was getting 1.9 60footers.

you just have to find a happy medium on your launches and how you feed the power.

oh yeah mine was also with a stock clutch

didnt last long after that :(

Hey man, im planning on going wakefield tracks soon and i just realised you've managed 1:14 at Wakefield. What do u have done to help you on track if u don't mind me asking? (i.e. rear & front struts)

BTW 1:14 is BLOODY GOOD!!! I know evo's that get 1:14 lol (Pretty Mildly Worked too)

Edited by R33Turbo
...a few years ago, there was a link being sent around to a US honda forum where some guy was doing a run on the freeway in his DC5R when they were new.

shifted from 4th at 8500rpm to 3rd instead of 5th.

Dood, i spent a whole 4 min searching, and i cant find it. I wanna see the mess!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...